Related papers: Fork stamping of pristine carbon nanotubes onto fe…
In this Letter we demonstrate that Permalloy (Py), a widely used Ni/Fe alloy, forms contacts to carbon nanotubes (CNTs) that meet the requirements for the injection and detection of spin-polarized currents in carbon-based spintronic…
We report an improved fabrication scheme for carbon based nanospintronic devices and demonstrate the necessity for a careful data analysis to investigate the fundamental physical mechanisms leading to magnetoresistance. The processing with…
With the objective of integrating single clean, as-grown carbon nanotubes into complex circuits, we have developed a technique to grow nanotubes directly on commercially available quartz tuning forks using a high temperature CVD process.…
We present an investigation of different thin-film evaporated ferromagnetic materials for their suitability as electrodes in individual single-wall and multi-wall carbon nanotube-based spin devices. Various electrode shapes made from…
Carbon nanotubes (CNT) belong to the most promising new materials which can in the near future revolutionize the conventional electronics. When sandwiched between ferromagnetic electrodes, the CNT behaves like a spacer in conventional…
Using carbon nanotubes (CNTs) produced by chemical vapor deposition, we have explored different strategies for the preparation of carbon nanotube devices suited for electrical and mechanical measurements. Though the target device is a…
We use numerical simulations to investigate the properties of metal contacts to three-dimensional arrays of carbon nanotubes (CNTs). For undoped arrays top-contacted with high or low work function metals, electrostatic screening is very…
We report on a dry transfer technique for single wall carbon nanotube devices which allows to embed them in high finesse microwave cavity. We demonstrate the ground state charge readout and a quality factor of about 3000 down to the single…
Printed electronics rely on the deposition of conductive liquid inks, typically onto polymeric or paper substrates. Among available conductive fillers for use in electronic inks, carbon nanotubes (CNTs) have high conductivity, low density,…
When continued device scaling reaches the ultimate limit imposed by atoms, technology based on atomically precise structures is expected to emerge. Device fabrication will then require building blocks with identified atomic arrangements and…
We report on the nano-electron beam assisted fabrication of atomically sharp iron-based tips and on the creation of a nano-soldering iron for nano-interconnects using Fe-filled multiwalled carbon nanotubes (MWCNTs). High energy electron…
High-performance solution-processed short-channel carbon nanotube (CNT) thin film transistors (TFTs) are fabricated using densely aligned arrays of metallic CNTs (m-CNTs) as source and drain electrodes, and aligned arrays of semiconducting…
We report a process to fabricate carbon nanotubes (CNT) by chemical vapor deposition at predetermined location. This process was enabled by patterning catalyst nanoparticles directly on silicon substrates with nanometer-scale precision…
Transfer printing methods are used to pattern and assemble monolithic carbon nanotube (CNT) thin-film transistors on large-area transparent, flexible substrates. Airbrushed CNT thin-films with sheet resistance 1kOhmsquare^{-1} at 80%…
Macroscopic fibers of carbon nanotubes (CNT) have emerged as an ideal architecture to exploit the exceptional properties of CNT building blocks in applications ranging from energy storage to reinforcement in structural composites.…
Controlled growth, patterning and placement of carbon nanotube (CNT) thin films for electronic applications are demonstrated. The density of CNT films is controlled by optimizing the feed gas composition as well as the concentration of…
The work here has demonstrated the use a simple microwave plasma process for welding carbon nanotubes onto solid surfaces such as plastics and glasses, it was found that due to the lower softening point and viscosity of polystyrene…
We have developed a fabrication process for incorporating a gate electrode into suspended single-walled carbon nanotube structures for scanning tunneling spectroscopy studies. The nanotubes are synthesized by chemical vapor deposition…
Single wall carbon nanotubes cooled to cryogenic temperatures are outstanding electronic as well as nano-electromechanical model systems. To probe a largely unperturbed system, we measure a suspended carbon-nanotube device where the…
Carbon nanotubes (CNTs) have attracted much attention for use in nanomechanical devices because of their exceptional properties, such as large resonant frequencies, low mass, and high quality factors. Here, we report the first experimental…