Related papers: Structural analysis of superconducting dipole prot…
There were designed and successfully tested at Fermilab several high temperature superconducting (HTS) model magnets for particle accelerators. Some of them worked in a persistent current mode continuously generating magnetic field in the…
In this paper we discuss the main principles of magnetic design for superconducting magnets (dipoles and quadrupoles) for particle accelerators. We give approximated equations that govern the relation between the field/gradient, the current…
Several coil structures have been used in accelerator superconducting quadrupole magnets, and cos2{\theta} quadrupole magnets are the most mature in theoretical research and engineering applications. However, the cos2{\theta} quadrupole…
The CSR External-target Experiment (CEE) is a large-scale spectrometer under construction at the Heavy Ion Research Facility in Lanzhou (HIRFL) for studying the phase structure of nuclear matter at high baryon density and the equation of…
A conduction-cooled superconducting magnet producing a transverse field of 4 Tesla has been designed for the new generation multi-field coupling measurement system, which was used to study the mechanical behavior of superconducting samples…
Possible layouts of superconducting dipoles for the main injector of High Energy LHC (HE-LHC) are proposed on the basis of the experience matured with ongoing R&D activities at the Italian National Institute of Nuclear Physics (INFN),…
There is an interest to design superconducting magnet systems working in a persistent current mode. These systems continuously generate magnetic field with disconnected power source working like permanent magnet devices. In this paper…
Future colliders will operate at increasingly high magnetic fields pushing limits of electromagnetic and mechanical stress on the conductor [1]. Understanding factors affecting superconducting (SC) magnet performance in challenging…
Superconductivity allows to construct and operate magnets at field values beyond 2 Tesla, the practical limitation of normal-conducting magnets exploiting ferro-magnetism. The field of superconducting magnets is dominated by the field…
This paper is about the mechanical design of superconducting accelerator magnets. First, we give a brief review of the basic concepts and terms. In the following sections, we describe the particularities of the mechanical design of…
The use of high-temperature superconductors in electric machines offers potentially large gains in performance compared to conventional conductors, but also comes with unique challenges. Here, the electromagnetic properties of…
Conceptual designs of a superconducting dipole magnet for a Storage Ring of a Muon Collider with a 1.5 TeV center of mass (c.o.m.) energy and an average luminosity of 10 34 cm-2s-1 are presented. In contrast to proton machines, the dipoles…
The goal of this research is the study of the thermomagnetic consequences in isotropic type-II superconductors, subjected to multi-component magnetic fields $\mathbf{H}_a = H_{ay}\hat{y}+H_{az}\hat{z}$, because the instability field…
Superconducting $MgB_2$ wires in Cu, GlidCop or Monel sheath with Nb or Fe barrier are prepared. Wires vary by sheath material, number of superconducting cores and their chemical composition. Wires are HIP-ed (Hot Isostatic Pressing) at…
Superconducting high-entropy alloys (HEAs) present a unique platform for studying the effect of disorder, composition, and crystal structure on superconducting pairing. In this study, we present a comprehensive bulk and microscopic…
We report results of the experimental test of the High Temperature Superconductor based fast cycling prototype accelerator magnet capable to operate up to about 300 Tesla per second field ramping rate with some 0.5 T field in the magnet…
High-temperature technical superconductors are potential candidates for compact and high-field tokamak magnets. The demand for higher fusion power can be met with an on-axis high magnetic field due to toroidal magnets. An R&D activity has…
The increase of energy in accelerators over the past decades has led to the design of superconducting magnets for both accelerators and the associated detectors. The use of Nb-Ti superconducting materials allows an increase in the dipole…
The U.S. Magnet Development Program (US-MDP) explores high-field accelerator magnets compatible with operational conditions beyond the limits of Nb$_3$Sn technology. The ongoing R\&D High-Temperature Superconductors (HTS) suggests using…
Permanent magnet has a small and compact structure, is especially suitable for a narrow space. With the aid of soft iron, the magnetic field can be increased much more and the field uniformity can be well controlled. Most Permanent magnets…