Related papers: Optimal control of circular cylinder wakes using l…
An investigation of optimal feedback controllers' performance and robustness is carried out for vortex shedding behind a 2D cylinder at low Reynolds numbers. To facilitate controller design, we present an efficient modelling approach in…
The flow around two circular cylinders arranged in a tandem exhibits complex wake interactions that lead to amplified unsteady loads, particularly in the co-shedding regime where a fully developed wake forms in the gap between the…
We present a model-based approach for the closed-loop control of vortex shedding in the cylinder wake. The control objective is to suppress the unsteadiness of the flow, which arises at a critical Reynolds number $Re_c$ through a…
We investigate the wake dynamics of an optimally designed wavy cylinder that completely suppresses the K\'arm\'an vortex shedding. Such a wavy cylinder is forced to oscillate with a sinusoidal motion in the crossflow direction. Examination…
The present study investigates the passive flow control phenomena over a two-dimensional circular cylinder using numerical simulations in the laminar regime. The aim is to explore one of the passive control techniques, which involves the…
The present article aims to study the suppression of vortex shedding using a passive flow control technique (slit through a circular cylinder) in the laminar regime (Re=100-500). The slit width ratio S/D (slit width/diameter) on the…
This work is focused to study the development and control of the laminar vortex breakdown of a flow enclosed in a cylinder. We show that vortex breakdown can be controlled by the introduction of a small fixed rod in the axis of the…
We perform direct numerical simulations to characterize the three-dimensional wake dynamics of long inclined circular cylinders with inhomogeneous end boundary conditions. Three Reynolds numbers, $\Rey=100$, 200 and 300 are considered to…
Numerical simulations are conducted to analyze flow characteristics around two tandem sharp-edged cylinders with cross sections of square (b*1 = 1) for the upstream cylinder and rectangle (b*2) for the downstream cylinder (b* = b/a, where a…
We consider linear feedback control of the two-dimensional flow past a cylinder at low Reynolds numbers, with a particular focus on the optimal placement of a single sensor and a single actuator. To accommodate the high dimensionality of…
We perform direct numerical simulations of flows over finite-aspect-ratio rotating circular cylinders at a Reynolds number of 150 over a range of aspect ratios ($AR=2-12$) and rotation rates ($\alpha=0-5$), aiming at revealing the free-end…
We study numerically the two-dimensional flow past a circular cylinder as a prototypical transitional flow, and investigate the influence of a generic slip boundary condition on the wake dynamics. We show that slip significantly delays the…
Flow around two rotating side-by-side circular cylinders of equal diameter D is numerically studied at the Reynolds number Re=40-200 and various rotation rate theta_i. The incoming flow is assumed to be two-dimensional laminar flow. The…
Flow control of bluff bodies plays a critical role in engineering applications. In this study, deep reinforcement learning (DRL) is employed to develop flow control strategies for the flow past an elliptical cylinder confined between two…
The vortex unsteadiness around a hemisphere-cylinder body at AOAs of 10 to 80 deg was studied using Large Eddy Simulation (LES) and Dynamic Mode Decomposition (DMD). The Reynolds number (Re) based on the cylinder diameter of the body is…
A variational technique is used to derive analytical expressions for the sensitivity of recirculation length to steady forcing in separated flows. Linear sensitivity analysis is applied to the two-dimensional steady flow past a circular…
The turbulent flow past a wall-mounted square cylinder with an aspect ratio of four was investigated with the aid of Spalart-Allmaras improved delayed detached-eddy simulation (S-A IDDES) and proper orthogonal decomposition (POD). The…
Direct numerical simulation is performed to study compressible, viscous flow around a circular cylinder. The present study considers two-dimensional, shock-free continuum flow by varying the Reynolds number between 20 and 100 and the…
The flow past inline oscillating rectangular cylinders is studied numerically at a Reynolds number representative of two-dimensional flow. A symmetric mode, known as S-II, consisting of a pair of oppositely-signed vortices on each side,…
Wind tunnel tests of 2D rough cylinders are presented. The goal is to simulate the alternate vortex shedding in flow regimes encountered in wind engineering applications, where the full scale Reynolds number is larger than the one that can…