Related papers: DVB-S2x Enabled Precoding for High Throughput Sate…
MIMO systems are considered as most promising for wireless communications. However, with an increasing number of radio front ends the corresponding energy consumption and costs become an issue, which can be relieved by the utilization of…
Hybrid analog-digital (A/D) transceivers designed for millimeter wave (mmWave) systems have received substantial research attention, as a benefit of their lower cost and modest energy consumption compared to their fully-digital…
With the goal of improving spectral efficiency, complex rotation-based precoding and power allocation schemes are developed for two multiple-input multiple-output (MIMO) communication systems, namely, simultaneous wireless information and…
Hybrid precoding is a promising technique for mmWave massive MIMO systems, as it can considerably reduce the number of required radio-frequency (RF) chains without obvious performance loss. However, most of the existing hybrid precoding…
This paper studies energy-efficient hybrid beamforming architectures and its algorithm design in millimeter-wave communication systems, aiming to address the challenges faced by existing hybrid beamforming due to low hardware flexibility…
We consider a linear precoder design for an underlay cognitive radio multiple-input multiple-output broadcast channel, where the secondary system consisting of a secondary base-station (BS) and a group of secondary users (SUs) is allowed to…
Millimeter wave (mmWave) signals experience orders-of-magnitude more pathloss than the microwave signals currently used in most wireless applications. MmWave systems must therefore leverage large antenna arrays, made possible by the…
This paper investigates the hybrid precoding design for millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems with finite-alphabet inputs. The precoding problem is a joint optimization of analog and digital precoders, and…
Enabling ultra fast systems has been widely investigated during recent decades. Although polarization has been deployed from the beginning in satellite communications, nowadays it is being exploited to increase the throughput of satellite…
Future wireless communications systems are expected to operate at bands above 100GHz. The high energy consumption of analog-to-digital converters, due to their high resolution represents a bottleneck for future wireless communications…
Hybrid precoding plays a key role in realizing massive multiple-input multiple-output (MIMO) transmitters with controllable cost. MIMO precoders are required to frequently adapt based on the variations in the channel conditions. In hybrid…
Massive multi-input multiple-out (MIMO) is a key ingredient in improving the spectral efficiencies for next-generation cellular systems. Thanks to the channel reciprocity, in time-division-duplexing mode, each base station (BS) can acquire…
In this letter, we focus on the hybrid precoding (HP) design for the reconfigurable intelligent surface (RIS) aided multi-user (MU) millimeter wave (mmWave) communication systems. Specifically, we aim to minimize the mean-squared-error…
Energy efficiency (EE) optimization of millimeter wave (mm-Wave) massive multiple-input multiple-output (MIMO) systems is emerging as an important challenge for the fifth generation (5G) mobile communication systems. However, the power of…
Holographic MIMO (HMIMO) has emerged as a promising solution for future wireless systems by enabling ultra-dense, spatially continuous antenna deployments. While prior studies have primarily focused on electromagnetic (EM) modeling or…
The development of intelligent and diversified ser vices in urban rail transit (URT) has resulted in an increasing de mand for high-rate communication between vehicles and ground equipment. However, existing URT communication systems strug…
Cell-free massive multiple-input multiple-output (MIMO) is a key technology for next-generation wireless systems. The integration of cell-free massive MIMO within the open radio access network (O-RAN) architecture addresses the growing need…
The focus of this paper is on multi-user MIMO transmissions for millimeter wave systems with a hybrid precoding architecture at the base-station. To enable multi-user transmissions, the base-station uses a cell-specific codebook of…
The unconventionally large aperture of extremely large-scale multiple-input multiple-output (XL-MIMO) arrays, in conjunction with the wider bandwidths in the upper-6 GHz (U6G) frequency bands, will very likely lead to non-negligible beam…
Most works on cell-free massive multiple-input multiple-output (MIMO) consider non-cooperative precoding strategies at the base stations (BSs) to avoid extensive channel state information (CSI) exchange via backhaul signaling. However,…