Related papers: Low latency protocol for transmission of measureme…
One of the optimization goals of a particle accelerator is to reach the highest possible beam peak current. For that to happen the electron bunch propagating through the accelerator should be kept relatively short along the direction of its…
Clock synchronization procedures are mandatory in most physical experiments where event fragments are readout by spatially dislocated sensors and must be glued together to reconstruct key parameters (e.g. energy, interaction vertex etc.) of…
Recently, the Low-Energy Demonstration Accelerator (LEDA) portion of the Accelerator Production of Tritium (APT) project reached its 100-mA, 8-hr CW beam operation milestone. LEDA consists of a 75-keV proton injector, 6.7-MeV, 350-MHz CW…
We describe a many-channel experiment control system based on a field-programmable gate array (FPGA). The system has 16 bit resolution on 10 analog 100 MS/s input channels, 14 analog 100 MS/s output channels, 16 slow analog input and output…
Wireless content caching has recently been considered as an efficient way in fog radio access networks (FRANs) to alleviate the heavy burden on capacity-limited fronthaul links and reduce delivery latency. In this paper, an advanced minimal…
This paper proposes a novel fluid antenna system (FAS)-enabled architecture to improve energy efficiency (EE) without sacrificing capacity. Specifically, we integrate FAS into cell-free massive MIMO systems to counteract low-resolution…
Fifth-generation (5G) cellular networks promise higher data rates, lower latency, and large numbers of interconnected devices. Thereby, 5G will provide important steps towards unlocking the full potential of the Internet of Things (IoT). In…
The Low Latency Fault Tolerance (LLFT) system provides fault tolerance for distributed applications, using the leader-follower replication technique. The LLFT system provides application-transparent replication, with strong replica…
Hybrid transceivers are designed for linear decentralized estimation (LDE) in a mmWave multiple-input multiple-output (MIMO) IoT network (IoTNe). For a noiseless fusion center (FC), it is demonstrated that the MSE performance is determined…
We describe a modular multi-channel data acquisition system based on the 5-15 Gigasample-per-second waveform-recording PSEC4 chip. The system architecture incorporates two levels of hardware with FPGA-embedded system control and in-line…
New PCI-e flash cards and SSDs supporting over 100,000 IOPs are now available, with several usecases in the design of a high performance storage system. By using an array of flash chips, arranged in multiple banks, large capacities are…
We propose a low-complexity receiver structure for the recently introduced Affine Filter Bank Modulation (AFBM) scheme, which is a novel waveform designed for integrated sensing and communications (ISAC) systems operating in…
Orthogonal Frequency Division Multiplexing (OFDM) has recently been applied in wireless communication systems due to its high data rate transmission capability with high bandwidth efficiency and its robustness to multi-path delay. Fading is…
This paper, for the first time, presents a low-complexity peak-power-assisted data-aided channel estimation (DACE) scheme for both single-input single-output (SISO) and multiple-input multiple-output orthogonal frequency division…
High sampling speed can be achieved using multiple Analog-to-Digital Converters (ADCs) based on the Time-Interleaving A/D Conversion (TIADC) technique. Various types of methods were proposed to correct the mismatch errors among parallel ADC…
This paper presents the first broadband digital over-the-air computation (AirComp) system for phase asynchronous OFDM-based federated edge learning systems. Existing analog AirComp systems often assume perfect phase alignment via channel…
Software Defined Radio (SDR) platforms are useful tools to design new wireless technologies or to improve specifications of existing ones. The IEEE 802.11p is the de-facto standard for Wireless Vehicular Ad-hoc NETworks (VANETs). It has…
We propose and model an optical communication scheme for short distance datacom links based on the distribution of information across a wide comb spectrum. This modulation format, orthogonal delay division multiplexing, allows the…
We describe progress and initial results achieved towards the goal of developing integrated multi-conductor arrays of shielded controlled-impedance flexible superconducting transmission lines with ultra-miniature cross sections and wide…
Integrated sensing and communication (ISAC) unifies wireless communication and sensing by sharing spectrum and hardware, which often incurs trade-offs between two functions due to limited resources. However, this paper shifts focus to…