Related papers: Suppression of parametric oscillatory instability …
We evaluated the parametric instabilities of LCGT (Japanese interferometric gravitational wave detector project) arm cavity. The number of unstable modes of LCGT is 10-times smaller than that of Advanced LIGO (U.S.A.). Since the strength of…
We report on measurements and modeling of the mode structure of tunable Fabry-P\'erot optical microcavities with imperfect mirrors. We find that non-spherical mirror shape and finite mirror size lead to loss, mode deformation, and shifted…
A fundamental limit to the sensitivity of optical interferometers is imposed by Brownian thermal fluctuations of the mirrors' surfaces. This thermal noise can be reduced by using larger beams which "average out" the random fluctuations of…
Three-mode parametric-instabilities risk stable operation of gravitational-wave detectors. Instabilities occur through time varying radiation-pressure distributions, derived from beating between two optical modes, exciting mirror acoustic…
Interferometric gravitational-wave detectors like LIGO need to be able to measure changes in their arm lengths of order $10^{-18}~$m or smaller. This requires very high laser power in order to raise the signal above shot noise. One…
Quantum noise limits the sensitivity of precision measurement devices, such as laser interferometer gravitational-wave observatories and axion detectors. In the shot-noise-limited regime, these resonant detectors are subject to a trade-off…
A derivation of the optical axis lenght fluctations due by tilts of the mirrors of the Fabry-Perot cavity of long-baseline interferometers for the detection of gravitational waves in presence of the gravitational field of the earth is…
Optical Fabry-Perot cavity with a movable mirror is a paradigmatic optomechanical systems. While usually the mirror is supported by a mechanical spring, it has been shown that it is possible to keep one of the mirrors in a stable…
Present gravitational wave detectors are based on the measurement of linear displacement in stable optical cavities. Here, we instead suggest the measurement of the twist of a chiral mechanical element induced by a gravitational wave. The…
Recent experimental progress in table-top experiments or gravitational-wave interferometers has enlightened the unique displacement sensitivity offered by optical interferometry. As the mirrors move in response to radiation pressure, higher…
A detailed simulation of Advanced LIGO test mass optical cavities shows that parametric instabilities will excite acoustic modes in the test masses in the frequency range 28-35 kHz and 64-72 kHz. Using nominal Advanced LIGO optical cavity…
Ultrahigh continuous-wave intensities (>300 GW/cm$^2$) in high-NA optical cavities enable applications from phase-contrast electron microscopy to ultradeep dipole traps for molecules. However, the intensity can be limited by the parametric…
We study the frequency splitting of the polarization eigenmodes of the fundamental transverse mode in CO2 laser-machined, high-finesse optical Fabry-Perot cavities and investigate the influence of the geometry of the cavity mirrors. Their…
Optical systems are often subject to parametric instability caused by the delayed response of the optical field to the system dynamics. In some cases, parasitic photothermal effects aggravate the instability by adding new interaction…
The DECi-hertz Interferometer Gravitational wave Observatory (DECIGO) is designed to detect gravitational waves at frequencies between 0.1 and 10 Hz. In this frequency band, one of the most important science targets is the detection of…
Direct observations of gravitational waves at frequencies below 10 Hz will play crucial roles for fully exploiting the potential of gravitational wave astronomy. One approach to pursue this direction is the utilization of laser…
Current gravitational-wave (GW) detectors are limited in the amount of circulating power they can reach. Optical absorption in the test masses leads to thermal effects that shift the eigenmodes of the optical cavities, and cause control…
A moving pellicle superconducting mirror, which is driven by radiation pressure on its one side, and by the Coulomb force on its other side, can become a parametric oscillator that can generate microwaves when placed within a high-Q…
This paper reports an experimental demonstration of partial displacement noise free laser interferometry in the gravitational wave detection band. The used detuned Fabry-Perot cavity allows the isolation of the mimicked gravitational wave…
We study the effect of finite size and misalignment on a fundamental optomechanical setup: a Fabry-P\'erot cavity with one fixed and one moveable mirror. We describe in detail light confinement under these real world imperfections and…