Related papers: Improved Confinement in JET High {beta} Plasmas wi…
Plasma Surface Interaction(PSI) effects on plasma burn-through are compared for the carbon wall and the ITER-Like Wall(ILW) at JET. For the carbon wall, the radiation barrier and C2+ influx have a significant linear correlation whereas the…
The major aspects linked to the use of the JET auxiliary heating systems: NBI, ICRF and LHCD, in the new JET ITER-like wall (JET-ILW) are presented. We show that although there were issues related to the operation of each system, efficient…
The aim of the JET ITER-like Wall Project was to provide JET with the plasma facing material combination now selected for the DT phase of ITER (bulk beryllium main chamber limiters and a full tungsten divertor) and, in conjunction with the…
In this paper important aspects of Lower Hybrid (LH) operation with the ITER Like Wall (ILW) [1] at JET are reported. Impurity release during LH operation was investigated and it was found that there is no significant Be increase with LH…
This paper compares the gyrokinetic instabilities and transport in two representative JET pedestals, one (pulse 78697) from the JET configuration with a carbon wall (C) and another (pulse 92432) from after the installation of JET's…
This paper investigates the effect of the ITER-like wall (ILW) on runaway electron (RE) generation through a comparative study of similar slow argon injection JET disruptions, performed with different wall materials. In the carbon wall…
When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced heat-fluxes are commonly observed on some plasma facing components close to the antennas. Experiments have recently been carried out on JET with the new ITER-Like-Wall…
New plasma regimes with high confinement, low core impurity accumulation and small Edge localized mode (ELMs) perturbations have been obtained close to ITER conditions in magnetically confined plasmas from the Joint European torus (JET)…
This paper reports the impact on confinement and power load of the high-shape 2.5MA ELMy H-mode scenario at JET of a change from an all carbon plasma facing components to an all metal wall. In preparation to this change, systematic studies…
Hydrogen majority plasmas will be used in the initial non-activated phase of ITER operation. Optimizing ion cyclotron resonance heating (ICRH) in such scenarios will help in achieving H-mode in these plasmas. Past JET experiments with the…
I-mode is a promising regime for future fusion reactors due to the high energy confinement and the moderate particle confinement. However, the effect of lithium, which has been widely applied for particle recycling and impurity control, on…
The performance of direct-drive inertial confinement fusion implosions relies critically on the coupling of laser energy to the target plasma. Cross-beam energy transfer (CBET), the resonant exchange of energy between intersecting laser…
We report experimental results validating the concept that plasma confinement is enhanced in a magnetic cusp configuration when beta (plasma pressure/magnetic field pressure) is order of unity. This enhancement is required for a fusion…
Lately the question has been raised if a modification of the energy-confinement scaling law with respect to the electron to ion temperature ratio, Te/Ti, is required. Theoretically, like in e.g. the Weiland model, the confinement is thought…
Simulations and theory are presented of an ITER locked mode thermal quench (TQ). In present experiments, locked mode disruptions have a long precursor phase, followed by a rapid termination and thermal quench, which can be identified with a…
Cross-beam energy transfer (CBET) between two lasers is investigated through theoretical analysis and two-dimensional hybrid simulations over sub-nanosecond to nanosecond timescales and millimeter spatial scales. A finite…
The core micro-instability characteristics of hybrid and baseline plasmas in a selected set of JET plasmas with carbon wall are investigated through local linear and non-linear and global linear gyro-kinetic simulations with the GYRO code…
An international experiment, ITER is proposed as the next essential and critical step on the path to demonstrating the scientific and technological feasibility of fusion energy. ITER would give unique opportunities to explore, in reactor…
Pellets of frozen material travelling into a magnetically confined fusion plasma are accelerated by the so-called pellet rocket effect. The non-uniform plasma heats the pellet ablation cloud asymmetrically, producing pressure-driven,…
Calculations are performed of the phase shift caused by the spatial modulation in the plasma density due to interference between a strong pump pulse and a weak probe pulse. It is suggested that a recent experiment [Loriot et al., Opt.…