Related papers: Coordinate Tomlinson-Harashima Precoding Design fo…

In this paper, we consider the problem of iterative detection and decoding (IDD) for multi-antenna systems using low-density parity-check (LDPC) codes. The proposed IDD system consists of a soft-input soft-output parallel interference (PIC)…

Hybrid precoding is a cost-effective approach to support directional transmissions for millimeter wave (mm-wave) communications, and its design challenge mainly lies in the analog component which consists of a network of phase shifters. The…

Millimeter wave (mmWave) systems will likely employ large antenna arrays at both the transmitters and receivers. A natural application of antenna arrays is simultaneous transmission to multiple users, which requires multi-user precoding at…

Dirty paper coding (DPC) refers to methods for pre-subtraction of known interference at the transmitter of a multiuser communication system. There are numerous applications for DPC, including coding for broadcast channels. Recently,…

A network relying on a large antenna-array-aided base station is designed for delivering multiple information streams to multi-antenna users over high-frequency bands such as the millimeter-wave and sub-Terahertz bands. The state-of-the-art…

True-time-delay (TTD) lines are recently applied inside Terahertz (THz) hybrid-precoding transceiver to acquire high beamforming gain against beam squint effect. However, beam tracking turns into a challenging puzzle where enormous…

Hybrid transceiver design in multiple-input multiple-output (MIMO) Tera-Hertz (THz) systems relying on sparse channel state information (CSI) estimation techniques is conceived. To begin with, a practical MIMO channel model is developed for…

A ternary message passing (TMP) decoding algorithm for low-density parity-check codes is developed. All messages exchanged between variable and check nodes have a ternary alphabet, and the variable nodes exploit soft information from the…

MIMO systems are considered as most promising for wireless communications. However, with an increasing number of radio front ends the corresponding energy consumption and costs become an issue, which can be relieved by the utilization of…

Hybrid analog-digital precoding significantly reduces the hardware costs in massive MIMO transceivers when compared to fully-digital precoding at the expense of increased transmit power. In order to mitigate the above shortfall, we use the…

The dirty paper channel (DPC) under a peak amplitude constraint arises in an optical wireless broadcast channel (BC), where the state at one receiver is the transmitted signal intended for the other receiver(s). This paper studies a class…

Hybrid precoding is a cost-effective approach to support directional transmissions for millimeter wave (mmWave) communications. While existing works on hybrid precoding mainly focus on single-user single-carrier transmission, in practice…

Cell-free (CF) systems have the potential to fulfill the increasing performance demand of future wireless applications by employing distributed access points (APs) that transmit the information over the same time-frequency resources. Due to…

Large-scale multi-user multiple-input multiple-output (MIMO) techniques have the potential to bring tremendous improvements for future communication systems. Counter-intuitively, the practical issues of having uncertain channel knowledge,…

In multi-user millimeter wave (mmWave) multiple-input-multiple-output (MIMO) systems, hybrid precoding is a crucial task to lower the complexity and cost while achieving a sufficient sum-rate. Previous works on hybrid precoding were usually…

Benefiting from tens of GHz bandwidth, terahertz (THz) communication is considered to be a promising technology to provide ultra-high speed data rates for future 6G wireless systems. To compensate for the serious propagation attenuation of…

This article investigates digital predistortion (DPD) linearization of hybrid beamforming large-scale antenna transmitters. We propose a novel DPD processing and learning technique for an antenna sub-array, which utilizes a combined signal…

The massive multiple-input multiple-output (MIMO) transmission technology has recently attracted much attention in the non-geostationary, e.g., low earth orbit (LEO) satellite communication (SATCOM) systems since it can significantly…

Time Reversal (TR) has been proposed as a competitive precoding strategy for low-complexity devices, relying on ultra-wideband waveforms. This transmit processing paradigm can address the need for low power and low complexity receivers,…

We propose a novel randomized channel sparsifying hybrid precoding (RCSHP) design to reduce the signaling overhead of channel estimation and the hardware cost and power consumption at the base station (BS), in order to fully harvest…