Related papers: ATCA-based ATLAS FTK input interface system
The High Level Trigger (HLT) system of the ALICE experiment is an online event filter and trigger system designed for input bandwidths of up to 25 GB/s at event rates of up to 1 kHz. The system is designed as a scalable PC cluster,…
The ATLAS Semiconductor Tracker (SCT) together with the pixel and the transition radiation detectors will form the tracking system of the ATLAS experiment at LHC. It will consist of 20000 single-sided silicon microstrip sensors assembled…
We describe the architecture evolution of the highly-parallel dedicated processor FTK, which is driven by the simulation of LHC events at high luminosity (1034 cm-2 s-1). FTK is able to provide precise on-line track reconstruction for…
To provide the generic clock, trigger and control function and fulfill the data transmission performance requirement in high energy physics (HEP) experiments, a MicroTCA Fast Control board (uFC) was developed based on the Advanced Mezzanine…
In next ten years, the Large Hadron Collider will be upgraded to the High Luminosity LHC (HL-LHC), resulting in ten time more integrated luminosity. To withstand the much harsher radiation and occupancy conditions of the HL-LHC, the inner…
In the future ALICE heavy ion experiment at CERN's Large Hadron Collider input data rates of up to 25 GB/s have to be handled by the High Level Trigger (HLT) system, which has to scale them down to at most 1.25 GB/s before being written to…
Many accelerators require considerable electronic systems for tests, verification, and operation. In Shenzhen Superconducting Soft X-ray Free Electron Laser (S3FEL), to meet the early tests and verification of various systems, save…
The high-luminosity phase of LHC operations (HL-LHC), will feature a large increase in simultaneous proton-proton interactions per bunch crossing up to 200, compared with a typical leveling target of 64 in Run 3. Such an increase will…
ATLAS detector at the LHC will undergo a major Phase-II upgrade for the High Luminosity LHC. The upgrade affects all major ATLAS systems, including the Trigger and Data Acquisition systems. As part of the Level-0 Trigger System, the Global…
During the upcoming Run 3 and Run 4 at the LHC the upgraded ALICE (A Large Ion Collider Experiment) will operate at a significantly higher luminosity and will collect two orders of magnitude more events than in Run 1 and Run 2. A part of…
This contribution introduces a novel test system developed to evaluate the signal transmission quality in high-speed data links for the 2026 Inner Tracker (ITk) upgrade of the ATLAS experiment. Using an FPGA-based data acquisition (DAQ)…
A multi-layer trigger system, based on programmable logic devices hosted on VME boards, has been implemented. It is completely scalable and suitable for handling from a few up to a few hundred channels. Custom software for monitoring and…
The FASER experiment is a new small and inexpensive experiment that is placed 480 meters downstream of the ATLAS experiment at the CERN LHC. FASER is designed to capture decays of new long-lived particles, produced outside of the ATLAS…
We present the Feature Tracking Kit (FTK), a framework that simplifies, scales, and delivers various feature-tracking algorithms for scientific data. The key of FTK is our high-dimensional simplicial meshing scheme that generalizes both…
The ATLAS Trigger system is a key component of the ATLAS experiment at the CERN Large Hadron Collider (LHC), designed to reduce the event rate from the 40 MHz proton-proton bunch crossing frequency to an output suitable for offline storage…
During the next major shutdown (2019-2020), the ATLAS experiment at the LHC will adopt the Front-End Link eXchange (FELIX) system as the interface between the data acquisition, detector control and TTC (Timing, Trigger and Control) systems…
The High Level Trigger (HLT) of the future ALICE heavy-ion experiment has to reduce its input data rate of up to 25 GB/s to at most 1.25 GB/s for output before the data is written to permanent storage. To cope with these data rates a large…
The ALICE Central Trigger Processor (CTP) is going to be upgraded for LHC Run 3 with completely new hardware and a new Trigger and Timing Control (TTC-PON) system based on a Passive Optical Network (PON) system. The new trigger system has…
The ATLAS detector at CERN's Large Hadron Collider (LHC) will be exposed to proton-proton collisions from beams crossing at 40 MHz. At the design luminosity of 10^34 cm^-2 s^-1 there are on average 23 collisions per bunch crossing. A…
The Apollo Advanced Telecommunications Computing Architecture (ATCA) platform is an open-source design consisting of a generic "Service Module" (SM) and a customizable "Command Module" (CM), allowing for cost-effective use in applications…