Related papers: Yielding and flow in aggregated particulate suspen…
An improved linear model is developed for elasto-plastic and adhesive contact. New correlations are proposed and validated to estimate the key input parameters of the model, including contact stiffness, yield point, maximum pull-off force…
Precipitation of fine particles into the base material of a metal is a potent strengthening mechanism. This is numerically analyzed within a continuum framework based on a higher order strain gradient plasticity theory and by use of an…
Granular materials are involved in most industrial and environmental processes, as well as many civil engineering applications. Although significant advances have been made in understanding the statics and dynamics of cohesionless grains…
An elasto-plastic model for concrete, based on a recently-proposed yield surface and simple hardening laws, is formulated, implemented, numerically tested and validated against available test results. The yield surface is smooth and…
Many soft jammed materials, such as pastes, gels, concentrated emulsions, and suspensions, possess a threshold stress, known as yield stress, that must be exceeded to cause permanent deformation or flow. In rheology, the term plastic flow…
We implement molecular dynamics simulations in canonical ensemble to study the effect of confinement on a $2d$ crystal of point particles interacting with an inverse power law potential proportional to $r^{-12}$ in a narrow channel. This…
The mechanics of cohesive or cemented granular materials is complex, combining the heterogeneous responses of granular media, like force chains, with clearly defined material properties. Here, we use a discrete element model (DEM)…
The rheology of cohesive granular materials, under a constant pressure condition, is studied using molecular dynamics simulations. Depending on the shear rate, pressure, and interparticle cohesiveness, the system exhibits four distinctive…
Gels are used to design bilayered structures with high residual stresses. The swelling of a thin layer on a compliant substrate leads to compressive stresses. The post-buckling of this layer is investigated experimentally; the wavelengths…
Flow behavior of a single-component yield stress fluid is addressed on the hydrodynamic level. A basic ingredient of the model is a coupling between fluctuations of density and velocity gradient via a Herschel-Bulkley-type constitutive…
One of the major shortcomings of discrete element modelling (DEM) is the computational cost required when the number of particles is huge, especially for fine powders and/or industry scale simulations. This study investigates the scaling of…
The two key phenomena occurring in the process of ceramic powder compaction are the progressive gain in cohesion and the increase of elastic stiffness, both related to the development of plastic deformation. The latter effect is an example…
Cohesive powders tend to form porous aggregates which can be compacted by applying an external pressure. This process is modelled using the Contact Dynamics method supplemented with a cohesion law and rolling friction. Starting with…
Dispersed colloidal particles within a suspension can aggregate and spontaneously self-organize into a robust, percolating structure known as a gel. These network-like structures are prevalent in nature and play a critical role in many…
Colloidal gels constitute an important class of materials found in many contexts and with a wide range of applications. Yet as matter far from equilibrium, gels exhibit a variety of time-dependent behaviours, which can be perplexing, such…
We explore the Mode I fracture toughness of a polymer gel containing a semi-infinite, growing crack. First, an expression is derived for the energy release rate within the linearized, small-strain setting. This expression reveals a crack…
In the mathematical modelling of compactional flow in porous media, the constitutive relation is typically modelled in terms of a nonlinear relationship between effective pressure and porosity, and compaction is essentially poroelastic.…
We study an elasticity model for compressed protein monolayers or particle rafts at a liquid interface. Based on the microscopic view of hard-core particles with soft shells, a bead-spring model is formulated and analyzed in terms of…
Particulate matter, such as foams, emulsions, and granular materials, attain rigidity in a dense regime: the rigid phase can yield when a threshold force is applied. The rigidity transition in particulate matter exhibits {\it bona fide}…
The early planetesimal growth proceeds through a sequence of sticking collisions of dust agglomerates. Very uncertain is still the relative velocity regime in which growth rather than destruction can take place. The outcome of a collision…