Related papers: Implementation and experience with luminosity leve…

In this article, we share our experience related to the new photo-injector commissioning at the SPARC\_LAB test facility. The new photo-injector was installed into an existing machine and our goal was not only to improve the final beam…

The LHCb experiment is running at the Large Hadron Collider to study CP violation and rare decays in the beauty and charm sectors. The motivation and the strategy of the upgrade envisaged for the long shutdown LS2 (2018) is presented. The…

This paper shows the baseline LHC machine parameters for the 2015 start-up. Many systems have been upgraded during LS1 and in 2015 the LHC will operate at a higher energy than before and with a tighter filling scheme. Therefore, the 2015…

In the transition to Run 3 in 2021, LHCb will undergo a major luminosity upgrade, going from 1.1 to 5.6 expected visible Primary Vertices (PVs) per event, and will adopt a purely software trigger. This has fueled increased interest in…

The foreseen luminosity upgrade for the LHC (a factor of 5-10 more in peak luminosity by 2021) poses serious constraints on the technology for the ATLAS tracker in this High Luminosity era (HL-LHC). In fact, such luminosity increase leads…

Measurements of luminosity obtained using the ATLAS detector during early running of the Large Hadron Collider (LHC) at sqrt(s) = 7 TeV are presented. The luminosity is independently determined using several detectors and multiple…

Achieving precise and adjustable control over laser frequency is an essential requirement in numerous applications such as precision spectroscopy, quantum control, and sensing. In many such applications it is desired to stabilize a laser…

The electric and magnetic dipole moment of charm and bottom baryons can be measured for the first time by using bent crystal technology at the LHC. The experimental method, proposed in recent years, suffers from limited statistics, which…

This paper describes the main concepts and performance goals for the LHC and HL-LHC projects. It summarizes the main technical challenges and highlights the key technologies that have been developed for both projects.

Harmonic lasing is a perspective mode of operation of X-ray FEL user facilities that allows to provide brilliant beams of higher energy photons for user experiments. Another useful application of harmonic lasing is so called Harmonic Lasing…

During the High Luminosity programme of the LHC collider (called HL-LHC), planned to start in 2030, the instantaneous luminosity will be increased from \num{\sim 2e34}~\si{cm^{-2}s^{-1}} to an unprecedented figure of about \num{\sim…

The first heavy-ion run at the LHC with Pb+Pb collisions at roots_NN = 2.76 TeV took place in the fall of 2010. In a short and relatively low luminosity run, the three detectors, ALICE, ATLAS and CMS showcased an impressive performance and…

The LHCb Ring-Imaging Cherenkov detectors are built to provide charged hadron identification over a large range of momentum. The upgraded detectors are also capable of providing an independent measurement of the luminosity for the LHCb…

The ATLAS experiment has been taking data efficiently since LHC collisions started, first at the injection energy of 450 GeV/beam and at 1.18 TeV/beam in 2009, then at 3.5 TeV/beam in 2010. Many results have already been obtained based on…

The ATLAS experiment took its first beam data in September 2008 and is actively preparing for the planned start of LHC collision data-taking in 2009. This preparation includes hardware and software commissioning, as well as calibration and…

A new type of fast luminosity separation scans ("Emittance Scans") was introduced at the CERN Large Hadron Collider (LHC) in 2015. The scans were performed systematically in every fill with full-intensity beams in physics production…

Resistive-anode Micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working in high flux and high radiations environment like in the HL-LHC (ten times the luminosity of the LHC).…

One of the challenges for every optical system is preserving the quality of the used beam, which may be significantly reduced, due to the low condition of used optical elements or their misalignment. There are plenty of methods focused on…

Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in…

The data acquisition system of the upgraded LHCb experiment includes the fast reconstruction of all hits in the vertex locator (VELO) pixel detector at the beam-crossing rate of 40 MHz, implemented as on-the-fly clustering embedded in the…