Related papers: Capillary origami of micro-machined micro-objects:…
We show elasto-capillary folding of silicon nitride objects with accurate folding angles between flaps of 70.6$\pm$0.1{\deg} and demonstrate the feasibility of such accurate micro-assembly with a final folding angle of 90{\deg}. The folding…
Microscopic devices are widely used in optomechanical experiments at the cutting-edge of precision experimental physics. Such devices often need to have high electrical conductivity but low reflectivity at optical wavelengths, which can be…
3D printing of high-quality silica photonic structures is particularly challenging, as surface roughness at the nanoscale can severely degrade optical performance through scattering losses. Here, we develop a technique to fold ultrasmooth…
Origami design principles are scale invariant and enable direct miniaturization of origami structures provided the sheets used for folding have equal thickness to length ratios. Recently, seminal steps have been taken to fabricate…
The interaction between elasticity and capillarity is used to produce three dimensional structures, through the wrapping of a liquid droplet by a planar sheet. The final encapsulated 3D shape is controlled by tayloring the initial geometry…
3D printing mechanically flexible composite materials with high electrical conductivity is currently hindered by the need to use high loading of conductive filler, which severely limits flexibility. Here, microstructural patterning of…
Folding nanopatterned flat sheets into complex 3D structures enables the fabrication of meta-biomaterials that combine a rationally designed 3D architecture (e.g., to tune mechanical and mass transport properties) with nanoscale surface…
Programmable folding of elastic sheets typically relies on predefined flexible creases or active materials-enabled hinges, which lack intrinsic bistability and limit reprogrammability within a single structure. Here, we present a…
Oxidation of two-dimensional (2D) layered materials has proven advantageous in creating oxide/2D material heterostructures, opening the door for a new paradigm of low-power electronic devices. Gallium (II) sulfide ($\beta$-GaS), a hexagonal…
Silicon anodes offer high energy densities for next-generation lithium-ion batteries; however, their application is limited by severe volume expansion during cycling. Making silicon porous or nanostructured mitigates this expansion but…
Manipulation of thin sheets by folding and cutting offers opportunity to engineer structures with novel mechanical properties, and to prescribe complex force-displacement relationships via material elasticity in combination with the…
The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high…
Manipulating the electrostatic double layer and tuning the conductance in nanofluidic systems at salt concentrations of 100 mM or higher has been a persistent challenge. The primary reasons are (i) the short electrostatic proximity length,…
Electric gating can strongly modulate a wide variety of physical properties in semiconductors and insulators, such as significant changes of conductivity in silicon, appearance of superconductivity in SrTiO3, the paramagnet-ferromagnet…
Thin films prepared of semiconductor nanoparticles are promising for low-cost electronic applications such as transistors and solar cells. One hurdle for their breakthrough is their notoriously low conductivity. To address this, we…
By mixing glass beads with a curable polymer we create a well-defined cohesive granular medium, held together by solidified, and hence elastic, capillary bridges. This material has a geometry similar to a wet packing of beads, but with an…
Amorphous insulators have localized wave functions that decay with the distance $r$ following exp($-r/\zeta$). Since nanoscale conduction is not excluded at $r<\zeta$, one may use amorphous insulators and take advantage of their size effect…
In this paper, we report on the use of tantalum and iridium as adhesion layers for platinum electrodes used in high temperature SAW devices based on langasite substrates (LGS). Unlike iridium, tantalum exhibits a great adhesive strength,…
Electronic conductivity in organic materials is well-established. Both semiconductive and metallic behavior is observed in (quasi) 0-, 1-, 2- and 3-dimensional carbon-based materials and is applied in a wide range of commercial devices.…
It is generally believed that silicon-based anodes for Li-ion batteries would benefit from stronger binders, as cyclic volume changes would not disrupt the cohesion of the composite electrode. Here, we put this belief to the proof by…