Related papers: Anisotropy in Fracking: A Percolation Model for Ob…
Recent developments in hydraulic fracturing (fracking) have enabled the recovery of large quantities of natural gas and oil from old, low permeability shales. These developments include a change from low-volume, high-viscosity fluid…
Injections of large volumes of water into tight shale reservoirs allows the extraction of oil and gas not previously accessible. This large volume "super" fracking induces damage that allows the oil and/or gas to flow to an extraction well.…
Understanding the controlling mechanisms underlying injection-induced seismicity is important for optimizing reservoir productivity and addressing seismicity-related concerns related to hydraulic stimulation in Enhanced Geothermal Systems.…
Hydraulic stimulation is a critical process for increasing the permeability of fractured geothermal reservoirs. This technique relies on coupled hydromechanical processes induced by reservoir stimulation through pressurized fluid injection…
Understanding and controlling fracture propagation is one of the most challenging engineering problems, especially in the oil and gas sector, groundwater hydrology and geothermal energy applications. Predicting the fracture orientation…
We present a model of the hydraulic fracturing of heterogeneous poroelastic media. The formalism is an effective continuum model that captures the coupled dynamics of the fluid pressure and the fractured rock matrix and models both the…
While the hydraulic fracturing technology, aka fracking (or fraccing, frac), has become highly developed and astonishingly successful, a consistent formulation of the associated fracture mechanics that would not conflict with some…
During hydraulic fracturing, the injection of a pressurized fluid in a brittle elastic medium leads to the formation and growth of fluid-filled fractures. A disc-like or penny-shaped fracture grows radially from a point source during the…
Displacement flows are common in hydraulic fracturing, as fracking fluids of different composition are injected sequentially in the fracture. The injection of an immiscible fluid at the center of a liquid-filled fracture results in the…
Shear dilation based hydraulic stimulations enable exploitation of geothermal energy from reservoirs with inadequate initial permeability. While contributing to enhancing the reservoir's permeability, hydraulic stimulation processes may…
Fractures play a critical role in governing fluid flow within subsurface energy systems, including oil and gas production, geologic carbon sequestration, and underground hydrogen storage. This study investigated the impact of pore-scale…
The nucleation and propagation of hydrofractures by injection of over pressured fluids in an elastic and isotropic medium are studied experimentally. Non-Newtonian fluids are injected inside a gelatine whose mechanical properties are…
The fracturing-flooding technology is a new process for the development of low-permeability oil reservoirs, achieving a series of successful applications in oilfield production. However, existing numerical simulation methods for pressure…
This paper describes a KGD-type model of a hydraulic fracture created by injecting fluid in weak, poorly consolidated rocks. The model is based on the key assumption that the hydraulic fracture is propagating within a domain where the…
We report laboratory experiments and numerical simulations demonstrating that the anisotropic characteristics of rocks play a major role in the elongation of hydraulic fractures propagating in a plane perpendicular to bedding. Transverse…
Hydraulic fracturing is one of the key technologies for reservoir stimulation in low-permeability/unconventional oil and gas fields. In response to the high energy consumption and greenhouse gas emissions caused by extreme flow-limiting…
In fractured poroelastic media under high differential stress, the shearing of fractures and faults and the corresponding propagation of wing cracks can be induced by fluid injection. Focusing on low-pressure stimulation with fluid…
We applied a hybrid-dimensional flow model to pressure transients recorded during pumping experiments conducted at the Reiche Zeche underground research laboratory to study the normal opening behavior of fractures due to fluid injection.…
Modeling important engineering problems related to flow-induced damage (in the context of hydraulic fracturing among others) depends critically on characterizing the interaction of porous media and interstitial fluid flow. This work…
This paper investigates proppant flow and transport in intersected fractures at angles typical for intersections of pre-existing and new hydraulic fractures. Proppant is small granular material, which is placed into hydraulic fractures…