Related papers: Injection performance evaluation for storage ring …
The multi-bunch injection has been adopt at SSRF which greatly increases the injection rate and reduces injection time compared to the single bunch injection. The multi-bunch injection will massively reduce the beam failure time during…
Fast ion instability has been observed in the early commissioning and operation of the Shanghai Synchrotron Radiation Facility (SSRF) storage ring. In this paper, a weak-strong code is used to simulate the fast ion instability in SSRF…
Shanghai Synchrotron Radiation Facility (SSRF) is a 3.5 GeV storage ring with a bunch rate of 499.654 MHz, harmonic number of 720, and circumference of 432 meters. SSRF injection works at 3.5 GeV, where the multi-bunch instabilities limit…
We report on an injection feedback scheme for the ThomX storage ring project. ThomX is a 50-MeV-electron accelerator prototype which will use Compton backscattering in a storage ring to generate a high flux of hard X-rays. Given the slow…
In order to improve the stability of synchrotron radiation, we developed a new method of machine learning-based closed orbit feedback and piloted it in the storage ring of the Shanghai Synchrotron Radiation Facility (SSRF). In our…
Synchrotron light source storage rings aim to maintain a continuous beam current without observable beam motion during injection. One element that paves the way to this target is the non-linear kicker (NLK). The field distribution it…
The Super Proton Synchrotron (SPS) injection system plays a fundamental role to preserve the quality of injected high-brightness beams for the Large Hadron Collider (LHC) physics program and to maintain the maximum storable intensity. The…
Shanghai Synchrotron Radiation Facility (SSRF), is one of the third-generation high-beam current (3.5 GeV) synchrotron light sources. In the storage ring of SSRF, multi-bunch instabilities would increase beam emittance and energy spread,…
The Shanghai Synchrotron Radiation Facility (SSRF) contains a 3.5-GeV storage ring serving as a national X-ray synchrotron radiation user facility characterized by a low emittance and a low coupling. The stability and quality of the…
In order to achieve its ambitious luminosity target, the SuperKEKB collider must achieve and sustain high beam currents on the order of Ampere in its storage rings. This requires continuous top-up injection and operation with a two-bunch…
Measuring the time structure of the storage ring on the sample spot inside the experimental hutch is a foundational step during the time-resolved experiments using the pulsed synchrotron X-rays with the time structure defined by the storage…
An on-axis injection scheme using a double-frequency RF system in a storage ring with small dynamic aperture is proposed. By altering RF voltages, empty RF buckets can be created which will be used for on-axis injection. After bunches are…
An interferometer system and an imaging system using visible synchrotron radiation (SR) have been installed in HLS II storage ring. Simulations of these two systems are given using Synchrotron Radiation Workshop(SRW) code. With these two…
Energy efficiency in terahertz range is evaluated experimentally of a spin-injection oscillator based on a ferromagnetic rod-film structure with point contact between the components. Choice of the film material influences substantially the…
The Storage Ring at the Advanced Light Source is capable of being filled in selectable buckets. Typically, 276 consecutive buckets out of 328 possible are selected. It has been found that the amount of charge injected is not uniform…
Precise diagnostic on the electron beam parameters is a very valuable tool and essential in the operation of synchrotron light sources. One possible option is to employ the emitted synchrotron radiation for non-destructive measurements. A…
The ion injectors of the CERN accelerator chain, in particular the Super Proton Synchrotron (SPS) and the Low Energy Ion Ring (LEIR), operate in a strong space charge~(SC) and intrabeam scattering (IBS) regime, which can degrade beam…
Orbit feedback system plays crucial roles for the operation of the 3rd generation light source. There are various issues in orbit feedback system should be addressed to achieve ultimate performance. The orbit feedback system in SRRC is…
Various effects of intense synchrotron radiation on the performance of particle accelerators, especially for storage rings, are discussed. Following a brief introduction to synchrotron radiation, the basic concepts of heat load, gas load,…
Multi-phase injection-locked ring oscillators (MP-ILROs) are widely used for multi-phase clock generation, with their phase accuracy primarily determined by the inherent accuracy of the oscillator itself, due to the suppression of input…