Related papers: Design, Construction and Test Arrangement of a Fas…
Development of energy-efficient fast cycling accelerator magnets is critical for the next generation of proton rapid cycling synchrotrons (RCS) for neutrino research and booster accelerators of future muon colliders. We see a unique…
We report results of the experimental test of the High Temperature Superconductor based fast cycling prototype accelerator magnet capable to operate up to about 300 Tesla per second field ramping rate with some 0.5 T field in the magnet…
Availability of 20 T operational field dipole magnets would open the way for a 16.5 TeV beam energy accelerator in the LHC tunnel. Here we discuss the main issues related to the magnet design of this extremely challenging dipole: main…
Hybrid magnets are currently under consideration as an economically viable option towards 20 T dipole magnets for next generation of particle accelerators. In these magnets, High Temperature Superconducting (HTS) materials are used in the…
Short sample HTS power cable composed of multiple 344C-2G strands and designed to energize a fast-cycling dipole magnet was exposed to a sweeping magnetic field in the (2-20) T/s rate. The B-field orientation toward the HTS strands wide…
The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets using Nb-Ti superconductor the practical field limit is…
A major focus of the global HEP community is on high field superconducting magnets made of High Temperature Superconductors (HTS) for future Energy Frontier Programs. Within the U.S. Magnet Development Program (US MDP), a key task is that…
Four decades ago development of high-current superconducting NbTi wire cables revolutionized the magnet technology for energy frontier accelerators, such as Tevatron, RHIC and LHC. The NbTi based magnets offered advantage of much higher…
HTS has the potential of a game changer for many applications of superconductivity, not last in the field of particle accelerators and detectors. This paper explores the potential of HTS, with a focus on REBCO-coated conductors, in relation…
Magnetic design proposed for a damping ring (DR) is based on second generation HTS cabling technology applied to the DC windings with a yoke and mu-metal-shimmed pole to achieve ~2T high-quality field within a 86 mm gap and 32-40 cm period.…
We present a concept of the rapid-cycling 1.7 T ReBCO magnet for 1 to 10 kT/s ramping range as required for muon acceleration in a future muon collider presently under study. This approach is based on the 6 kA CORC-like cable constructed…
This paper reports a newly developed high current transformer-rectifier High-Tc Superconducting (HTS) flux pump switched by dynamic resistance. A quasi-persistent current of over 1.1 kA has been achieved at 77 K using the device, which is…
High temperature superconducting (HTS) tape can be cut and stacked to generate large magnetic fields at cryogenic temperatures after inducing persistent currents in the superconducting layers. A field of 17.7 T was trapped between two…
The increase of energy in accelerators over the past decades has led to the design of superconducting magnets for both accelerators and the associated detectors. The use of Nb-Ti superconducting materials allows an increase in the dipole…
A concept of a 650 MHz CW magnetron transmitter with fast control in phase and power, based on two-stage injection-locked CW magnetrons, has been proposed to drive Superconducting Cavities (SC) for intensity-frontier accelerators. The…
There were designed and successfully tested at Fermilab several high temperature superconducting (HTS) model magnets for particle accelerators. Some of them worked in a persistent current mode continuously generating magnetic field in the…
A facility capable of testing superconducting cables with current of tens of kA is essential for the development of large superconducting magnets. A superconducting transformer (SCT) is a suitable choice as a high DC current source for…
A possible application of the HTS (ReBCO) rapid-cycling dipole magnet [1] in the first stages of muon acceleration consisting of Recirculating Linear Accelerator (RLA) and followed-up first Rapid Cycling Synchrotron (RCS-1) is presented.…
The fabrication and assembly of High Temperature Superconducting (HTS) magnets can be significantly streamlined by (1) direct deposition of HTS onto modular components and (2) laser-ablated grooves to bound and guide the electric currents…
As the only high-temperature superconducting (HTS) material available as an isotropic, twisted, multifilamentary round wire, Bi-2212 is very promising for expanding the high-field superconducting accelerator magnet toolbox beyond the…