Related papers: Ultrastable low-noise current amplifier
Noiseless linear amplifiers (NLAs) serve as an effective means to enable long-distance continuous-variable (CV) quantum key distribution (QKD), even under realistic conditions with non-unit reconciliation efficiency. Separately, unitary…
An LCL filter offers superior attenuation for high-frequency harmonics for three-phase grid-following inverters compared to LC and L filters. However, it also introduces an inherent resonance peak, which can lead to power quality issues or…
A low power cascode SiGe BiCMOS low noise amplifier (LNA) with current reuse and zero-pole cancellation is presented for ultra-wideband (UWB) application. The LNA is composed of cascode input stage and common emitter (CE) output stage with…
Low-noise temperature measurements at frequencies in the milli-Hertz range are needed in the LISA and LISA PathFinder (LPF). The required temperature stability for LISA is around 10 uK/sqrt(Hz) at frequencies down to 0.1 mHz. In this paper…
Low-frequency resonances with low stability margins affect video bandwidth characteristics of power amplifiers. In this work, a non-connectorized measurement technique is presented to obtain the low-frequency critical poles at internal…
Over sixty years ago, it was hypothesized that specially designed acoustic systems that leveraged the acoustoelectric effect between phonons and charge carriers could revolutionize radio frequency electronic systems by allowing nonlinear…
Thermal noise is the predominant instability in the provision of ultrastable laser frequency, referencing to an optical cavity. Reducing the thermal-noise limit of a cavity means either making it larger to spread thermal fluctuations,…
We report on the design and characterization of a high-power amplifier with an output power of 36.5 dBm for a frequency range of 50 MHz to 1000 MHz with a total gain of 40 dB. The amplifier is optimized for driving acousto-optic and…
This paper presents a Gm-C dynamic amplifier with high linearity and high temperature and power supply voltage stability. The main part of the amplifier employs two asymmetric differential pairs to enhance transconductance linearity. The…
We describe the design and performance of a series of fast, precise current sensing noise thermometers. The thermometers have been fabricated with a range of resistances from 1.290 $\Omega$ down to 0.2 m$\mathrm{\Omega}$. This results in…
Quantum mechanics imposes that any amplifier that works independently on the phase of the input signal has to introduce some excess noise. The impossibility of such a noiseless amplifier is rooted into unitarity and linearity of quantum…
Present semiconductor research is increasingly focusing on either higher speeds or higher linearity or both. Applications range from consumer, industrial, healthcare and military. Typically such circuits are fabricated in today's…
We report on the noise of a lumped element Direct Current Superconducting Quantum Interference Device amplifier. We show that the noise temperature in the 4 GHz-8 GHz range over ranges of 10's of MHz is below 1 kelvin (three photons of…
This paper presents an ultra-low noise L-band radio astronomical cryogenic receiver for FAST telescope. The development of key low noise microwave parts of Coupling-LNA and conical quad-ridge OMT and reasonable system integration achieve…
An ultra-low-voltage crystal quartz oscillator is proposed. The approach to its design is essentially based on using a HEMT operating in unsaturated dc regime and a quartz resonator as a resonant impedance transformer. The 25 MHz prototype…
Many modern electronic devices utilize linear Hall sensors to measure current and the magnetic field, as well as to perform switching and latching operations. Smartphones, laptops, and e-readers all work with very low (sub-mA) currents. To…
A four-stage operational transconductance amplifier (OTA) for ultra-low-power applications is introduced in this paper. The proposed circuit inclusive of frequency compensation requires minimal transistor count and passives, overcoming the…
The design and performance of a sensitive and reliable cross-correlation spectrum analyzer for studying low frequency transport noise is described in detail. The design makes use of common PC-based data acquisition hardware and…
In high-performance RF transceivers the thrust of has been on lower noise LNAs and high-power high-speed PAs. The performance trade-off has forced many solutions to have the LNA and PA on a separate die compared to the rest of baseband.…
Longitudinal space charge (LSC) driven microbunching instability in electron beam formation systems of X-ray FELs is a recently discovered effect hampering beam instrumentation and FEL operation. The instability was observed in different…