Related papers: Simulation of an axial vircator with a three-cavit…
The behavior of the generation efficiency and radiation spectrum of a three-cavity axial vircator versus the radius of the injected electron beam, its impedance and energy homogeneity is studied. This paper establishes that for each…
Triode reflex geometry vircator operating within 3.0 - 4.2 GHz range with efficiency up to 6% is developed and experimentally investigated. Shiftable reflectors are shown to enable frequency tuning and output power control. Radiation…
Vircators (Virtual Cathode Oscillators) are sources of short-pulsed, high power, microwave (GHz) radiation. An essentially dimensional argument relates their radiated power, pulse energy and oscillation frequency to their driving voltage…
In this paper, we review and compare HPM sources operating without a magnetic field to guide the electron beam that are capable of producing high-power microwave (HPM) pulses with a duration of about 100 ns. The proposed analysis summarizes…
Fabrication processes involving anhydrous hydrofluoric vapor etching are developed to create high-$Q$ aluminum superconducting microwave resonators on free-standing silicon membranes formed from a silicon-on-insulator wafer. Using this…
Low-power quadrature voltage-controlled oscillator (QVCO) design utilizing transformer-feedback and current-reuse techniques with increased frequency range is proposed in this paper. With increasing demand for QVCOs in on-chip applications,…
The frequency band 1-15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of…
The stable precession region in the spintronic oscillator with an in-plane magnetic tunnel junction is very narrow under small external fields, restricting its applications such as for microwave generators. Here we show that this region can…
An algorithm of particle-in-cell simulations is described and tested to aid further the actual design of simple vircators working on axially symmetric modes. The methods of correction of the numerical solution, have been chosen and jointly…
The effect of an external harmonic signal on the characteristics of microwave generation in a nonrelativistic electron beam with virtual cathode (VC) formed in a static retarding electric field (low-voltage vircator system) has been…
In this paper, a new design has been proposed for the realization of high-frequency memcapacitor emulators built with three OTAs. This paper also proposes the application of memcapacitor as an amplitude modulator. Furthermore, applications…
We have produced high-quality complex microwave circuits, such as multiplexed resonators and superconducting phase qubits, using a "vacuum-gap" technology that eliminates lossy dielectric materials. We have improved our design and…
The circuit presented in this paper aims at providing three 40 Vpp 50Hz AC voltages sources with 120-degree phase separation between them. This is a fully analogue circuit that uses standard, low-cost electronic components without resorting…
A promising way to store quantum information is by encoding it in the bosonic excitations of microwave resonators. This provides for long coherence times, low dephasing rates, as well as a hardware-efficient approach to quantum error…
Simulation involves predicting responses of a physical system. In this article, we simulate opto-acoustic signals generated in a three-dimensional volume due to absorption of an optical pulse. A separable computational model is developed…
This article is present high precision multiwave rectifier circuit operating in low voltage plus or minus 1.5 Volt current modes by CMOS technology 0.5 \mum, receive input and give output in current mode, respond at high frequency period.…
In the context of engineered quantum systems, there is a demand for superconducting tunable devices able to operate with high Q-factors at power levels equivalent to only a few photons. In this work, we developed a 3D microwave reentrant…
This paper presents a micro electrostatic vibration-toelectricity energy converter. For the 3.3 V supply voltage and 1cm2 chip area constraints, optimal design parameters were found from theoretical calculation and Simulink simulation. In…
A 325MHz beta=0.14 superconducting half wave resonator(HWR) prototype has been developed at the Institute of High Energy Physics(IHEP), which can be applied in continuous wave (CW) high beam proton accelerators. In this paper, the…
In this work the authors implemented a resonator based upon microstrip cavities that permits the generation of microwaves with arbitrary polarization. Design, simulation, and implementation of the resonators were performed using standard…