Related papers: Application of the DRS4 Chip for GHz Waveform Digi…
Joint communication and sensing (JCAS) is a very promising 6G technology, which attracts more and more research attention. Compared with communication, radar has many unique features in terms of waveform design criteria, self-interference…
Time-tagging units and coincidence detectors are used in many scientific research fields. The required timing resolution and number of input channels are varying, but some emerging experiments in the field of quantum optics require up to 32…
An FPGA based digital signal processing (DSP) system for biasing and reading out multiplexed bolometric detectors for mm-wavelength telescopes is presented. This readout system is being deployed for balloon-borne and ground based cosmology…
The dominating waveform in 5G is orthogonal frequency division multiplexing (OFDM). OFDM will remain a promising waveform candidate for joint communication and sensing (JCAS) in 6G since OFDM can provide excellent data transmission…
One of the many limitations with the mixed-signal design is physically testing circuit ideas. While it is easier to test digital circuits with FPGAs, this can not be done usually with mixed-signal circuits. Although some FPGAs have built-in…
Cold atom interferometers have matured to a powerful tool in fundamental physics research, and they are currently on their way from realizations in the laboratory to applications in the real world. The radio frequency (RF) generator is an…
Leveraging the available millimeter wave spectrum will be important for 5G. In this work, we investigate the performance of digital beamforming with low resolution ADCs based on link level simulations including channel estimation, MIMO…
Precise measurements of the frequency and phase of an electrical or optical signal play a key role in various branches of science and engineering. Tracking changing laser frequencies is especially demanding when the lasers themselves are…
Discrimination of the detection of fast neutrons and gamma rays in a liquid scintillator detector has been investigated using digital pulse-processing techniques. An experimental setup with a 252Cf source, a BC-501 liquid scintillator…
In this paper we present a novel high-resolution multi-channel FPGA-based time-to-digital converter (TDC). We designed and implemented a complex electronic circuit on the FPGA, whose overall accuracy is several orders of magnitude greater…
In the scanning transmission electron microscope, both phase imaging of beam-sensitive materials and characterisation of a material's functional properties using in-situ experiments are becoming more widely available. As the practicable…
Coincidence technique and the coincidence measurement systems have been developed and applied for over 40 years. Most of popular coincidence measurement systems were based on analog electronics techniques such as time to amplitude…
Radar has become an essential sensor for autonomous navigation, especially in challenging environments where camera and LiDAR sensors fail. 4D single-chip millimeter-wave radar systems, in particular, have drawn increasing attention thanks…
Dynamic metasurface antennas (DMAs) provide a new paradigm to realize large-scale antenna arrays for future wireless systems. In this paper, we study the downlink millimeter wave (mmWave) DMA systems with limited number of radio frequency…
The WaveDAQ is a newly-designed digitization Trigger and Data AcQuisition system (TDAQ) allowing Multi-gigasample waveform recording on a large amount of channels (up to 16384) by using the DRS4 analog switched capacitor array as…
Today, wide-open, high-resolution Doppler frequency shift (DFS) estimation is essential for radar, microwave/millimeter-wave, and communication systems. Using photonics technology, an effective approach is proposed and experimentally…
The Current Mirror (CM) is a basic building block commonly used in analogue and mixed-signal integrated circuits. Its significance lies in its ability to replicate and precisely regulate the current, making it crucial in various…
We have developed a Time-to-Digital Converter (TDC) application in a Xilinx Kintex-7 Field Programmable Gate Array (FPGA). This TDC, based on the Tapped-Delay Line (TDL) and Wave Union A (WU-A) techniques, achieves an independent time…
Advances in astronomy are intimately linked to advances in digital signal processing (DSP). This special issue is focused upon advances in DSP within radio astronomy. The trend within that community is to use off-the-shelf digital hardware…
4D millimeter-wave (mmWave) radars are increasingly used in robotics, as they offer robustness against adverse environmental conditions. Besides the usual XYZ position, they provide Doppler velocity measurements as well as Radar Cross…