Related papers: Large-area Reflective Infrared Filters for Millime…
Simulations and measurements on selective laser etching of display glasses are reported. By means of a holographic 3D beam splitter, ultrashort laser pulses are focused inside the volume of a glass sample creating type III modifications…
This paper presents a new research study on the platform fabrication of fluorescence bio-detection chip with an optical fiber transmission. Anisotropic wet etching on (100) silicon wafers to fabrication V-groove for optical fiber alignment…
Two types of optical metamaterials operating at near-IR and mid-IR frequencies, respectively, have been designed, fabricated by nanoimprint lithography (NIL), and characterized by laser spectroscopic ellipsometry. The structure for the…
Highly ambitious initiatives aspire to propel a miniature spacecraft to a neighboring star within a human generation, leveraging the radiation pressure of lasers for propulsion. One of the main challenges to achieving this enormous feat is…
With the increasing complexity of the electromagnetic environment, electromagnetic interference has already been an important problem for optoelectronic systems to be reckoned with. The metal mesh film is a kind of widely used…
Refractive optical elements are widely used in millimeter and sub-millimeter astronomical telescopes. High resistivity silicon is an excellent material for dielectric lenses given its low loss-tangent, high thermal conductivity and high…
The Mid-infrared ELT Imager and Spectrograph (METIS) will provide the Extremely Large Telescope (ELT) with a unique window to the thermal- and mid-infrared (3 - 13 microns). Its single-conjugate adaptive optics (SCAO) system will enable…
We demonstrate a silicon-based, single-layer anti-reflection coating that suppresses the reflectivity of metals at near-infrared frequencies, enabling optical probing of nano-scale structures embedded in highly reflective surroundings. Our…
Thermal imaging and sensing technologies offer critical information about our thermally radiant world, and in recent years, have seen dramatic increases in usage for a range of applications. However, the cost and technical finesse of…
We develop a proto-model of an off-axis reflective telescope for infrared wide-field observations based on the design of Schwarzschild-Chang type telescope. With only two mirrors, this design achieves an entrance pupil diameter of 50 mm and…
I very briefly describe the latest generation near infrared (1-2.5 micron) instruments which are available on, or under development for `large' (D>=3.5 m) telescopes. Most of the imagers under construction are limited to relatively small…
Future millimeter wavelength experiments aim to both increase aperture diameters and broaden bandwidths to increase the sensitivity of the receivers. These changes produce a challenging anti-reflection (AR) design problem for refracting and…
Three-dimensional direct laser writing via two photon polymerization is used to fabricate anti-reflective structured surfaces composed of sub-wavelength conicoid features optimized to operate over a wide bandwidth in the near-infrared range…
Semiconductor lasers with ultra-low thresholds and minimal footprints are a topic of active research. Such devices require a combination of high quality factor laser cavities with small active region volumes, which drives the quest for…
Subwavelength diffractive optics known as meta-optics have demonstrated the potential to significantly miniaturize imaging systems. However, despite impressive demonstrations, most meta-optical imaging systems suffer from strong chromatic…
Nanophotonic engineering of light-matter interaction at subwavelength scale allows thermal radiation that is fundamentally different from that of traditional thermal emitters and provides exciting opportunities for various thermal-photonic…
We have demonstrated the fabrication of a monolithic, 5-meter diameter, aluminum reflector with 17.4 $\mu$m RMS surface error. The reflector was designed to avoid the problem of pickup due to scattering from panel gaps in a large,…
A metasurface lens (meta-lens) bends light using nanostructures on a flat surface. Macroscopic meta-lenses (mm- to cm-scale diameter) have been quite difficult to simulate and optimize, due to the large area, the lack of periodicity, and…
A method of the mid-IR-laser microscopy has been proposed for the investigation of the large-scale electrically and recombination active defects in semiconductors and non-destructive inspection of semiconductor materials and structures in…
With the advent of microsphere assisted microscopy in 2011, this technique emerged as a simple and easy way to obtain optical super-resolution. Although the possible mechanisms of imaging by microspheres are debated in the literature, most…