Related papers: Microstructure-dependent oxidation-assisted deallo…
In order to get homogeneous nanostructured Aluminum Nitride deposits, thin films were grown at room temperature on [001] Si substrates by radio frequency magnetron reactive sputtering. The deposits were analysed by Transmission Electron…
The present study reports on the structure formation in thin epitaxial nickel-aluminum films (Ni1-xAlx; Al atomic fraction x up to x=0.24) grown on MgO(001) substrates by magnetron sputtering. Experimental and computational data demonstrate…
Epitaxial thin films have been utilised to investigate the radiolytic dissolution of uranium dioxide interfaces. Thin films of UO$_2$ deposited on single crystal yttria stabilised zirconia substrates have been exposed to water in the…
Advanced nanodevices require high-precision machining of thin films using ultrafast lasers. However, thin-film fabrications cause variations in microstructure, crystallographic orientation, and residual stresses owing to coating conditions…
Oblique angle deposited oxide thin films have opened up new dimensions in fabricating optical interference devices with tailored refractive index profile along thickness by tuning its microstructure by varying angle of deposition.…
Systematic exploration of amorphous ABC heterostructures revealed that nanoscale morphological modifications markedly improved their artificial bulk second-order susceptibility. These amorphous birefringent heterostructures were fabricated…
Polycrystalline diamond films with systematic change in microstructure that varies from microcrystalline to nanocrystalline structure are synthesized on Si by hot filament chemical vapor deposition. The morphology and structural properties…
Thin films of Zn2+ doped cupric oxide (CuO) were synthesized using spin coating technique starting from a solution with Cu and Zn. The speed of spin coating and time duration were varied to fabricate a film with required uniform thickness.…
Transparent pure and Cu-doped (2.5, 5 and 10 at. %) anatase TiO2 thin films were grown by pulsed laser deposition technique on LaAlO3 substrates. The samples were structurally characterized by X-ray absorption spectroscopy and X-ray…
Recent work has demonstrated microscale compressive plasticity in pulse laser deposited (PLD) amorphous alumina (a-Al2O3). This work explores microscale bending plasticity and fracture behavior of a-Al2O3 films deposited using three…
To study the size and strain rate dependency of copper polycrystalline microstructures, a multi-layered copper/Al$_2$O$_3$ thin film was deposited on a Si substrate using a hybrid deposition system (combining physical vapour and atomic…
Heterostructures increasingly attracted attention over the past several years to enable various optoelectronic and photonic applications. In this work, atomically thin interfaces of Ir/Al2O3 heterostructures compatible with…
The IR optical absorption (0.1-1.5 eV) in the $La_{0.7}Ca_{0.3}MnO_3$ films on LAO substrate exhibits the drastic temperature evolution of the spectral weight evidencing the insulator to metal transition. Single crystal films were found to…
We report the synthesis and characterization of Nd_{0.5}Sr_{0.5}MnO_{3} thin films grown by the Pulsed Laser Deposition technique on 100 -oriented LaAlO_{3} substrates. X-ray diffraction (XRD) studies show that the films are 101 -oriented,…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…
A template-free process for the synthesis of nanocrystalline TiO2 hierarchical microstructures by reactive Pulsed Laser Deposition (PLD) is here presented. By a proper choice of deposition parameters a fine control over the morphology of…
Quantitative 3D characterization of materials degradation in oxidizing environments remains limited. Here, we apply a correlative tomography-based mass balance framework to Cr$_2$AlC, a coating candidate for accident tolerant nuclear fuel…
Porous metal oxides with nano-sized features attracted intensive interest in recent decades due to their high surface area which is essential for many applications, e.g. Li ion batteries, photocatalysts, fuel cells and dye-sensitized solar…
Microstructure uniformity of the Al-Nd target materials with Al11Nd3 significantly affects the performance of the fabricated film, which is widely used as wiring material in largesize thin-film transistor liquid crystal display (TFT-LCD)…
Thin film metallic glasses undergoing devitrification can form partially crystallized or fully crystallized materials with novel structural and magnetic properties. The development of desired and tunable properties of such systems drives…