Related papers: X-ray tomography system to investigate granular ma…
Low-dose tomography is highly preferred in medical procedures for its reduced radiation risk when compared to standard-dose Computed Tomography (CT). However, the lower the intensity of X-rays, the higher the acquisition noise and hence the…
This paper describes the setup of two different solutions for laboratory X-ray microscopy working with geometric magnification. One setup uses thin-film transmission targets with an optimized tungsten-layer thickness and the electron gun…
Different technical and physical factors may affect the image quality reconstructed using a Computed Tomography system. We have developed and designed a 2D Gamma Computed Tomography set up to study the effect of some physical parameters.…
X-ray tomography is a powerful volumetric imaging technique, but detailed three dimensional (3D) imaging requires the acquisition of a large number of individual X-ray images, which is time consuming. For applications where spatial…
Scanning transmission X-ray microscopy and ptychography have become mature tools for high-resolution, element-specific imaging of nanoscale structures. However, transmission geometries impose stringent constraints on sample thickness and…
X-ray imaging is a prevalent technique for non-invasively visualizing the interior of the human body and opaque instruments. In most commercial x-ray modalities, an image is formed by measuring the x-rays that pass through the object of…
Compressed sensing is an image reconstruction technique to achieve high-quality results from limited amount of data. In order to achieve this, it utilizes prior knowledge about the samples that shall be reconstructed. Focusing on image…
Scanning transmission X-ray microscopy (STXM) is a nanoscale imaging technique that can utilize several powerful contrast mechanisms for the quantitative mapping of chemical and physical materials properties. Spatial resolutions down to…
We propose a noise-resilient deep reconstruction algorithm for X-ray tomography. Our approach shows strong noise resilience without obtaining noisy training examples. The advantages of our framework may further enable low-photon tomographic…
CT scans are the standard-of-care for many clinical ailments, and are needed for treatments like external beam radiotherapy. Unfortunately, CT scanners are rare in low and mid-resource settings due to their costs. Planar X-ray radiography…
This study presents a practical and dose-efficient strategy for resolution enhancement in planar radiography, based on mechanically supersampled acquisition with high-Z photon-counting detectors (PCDs). Unlike prior event-based or cluster…
This study presents a comprehensive workflow for investigating particulate materials through combined 360{\deg} electron tomography (ET), nano-computed X-ray tomography (nanoCT), and micro-computed X-ray tomography (microCT), alongside a…
A well-known diagnostic imaging modality, termed ultrasound tomography, was quickly developed for the detection of very small tumors whose sizes are smaller than the wavelength of the incident pressure wave without ionizing radiation,…
We propose an imaging system and methodology for mapping soft-tissue samples in three dimensions, with micron-scale and isotropic spatial resolution, with low-concentrations as well as in the absence of heavy metal staining. We used hard…
We demonstrate a neutron tomography technique with sub-micrometer spatial resolution. Our method consists of measuring neutron diffraction spectra using a double crystal diffractometer as a function of sample rotation and then using a phase…
Due to the merit of establishing volumetric data, X-ray computed tomography (XCT) is increasingly used as a non-destructive evaluation technique in the quality control of advanced manufactured parts with complex non-line-of-sight features.…
The image reconstruction problem of the tomographic imaging technique magnetic particle imaging (MPI) requires the solution of a linear inverse problem. One prerequisite for this task is that the imaging operator that describes the mapping…
Robotic ultrasound (US) imaging has been seen as a promising solution to overcome the limitations of free-hand US examinations, i.e., inter-operator variability. However, the fact that robotic US systems cannot react to subject movements…
Sparse-view 3D CT reconstruction aims to recover volumetric structures from a limited number of 2D X-ray projections. Existing feedforward methods are constrained by the scarcity of large-scale training datasets and the absence of direct…
The use of coherent x-ray beams has been greatly developing for the past decades. They are now used by a wide scientific community to study biological materials, phase transitions in crystalline materials, soft matter, magnetism, strained…