Related papers: Multiaxial Fatigue Behaviour of A356-T6
The paper at hand presents an in-depth investigation into the fatigue behavior of the high-strength aluminum alloy EN AW-7020 T6 using both experimental and numerical approaches. Two types of specimens are investigated: a dog-bone specimen…
Component failure due to cold dwell fatigue of titanium and its alloys is a long-standing problem which has significant safety and economic implications to the aviation industry. This can be addressed by understanding the governing…
This paper presents an experimental study of the fretting crack nucleation threshold, expressed in terms of loading conditions, with a cylinder/plane contact. The studied material is a damage tolerant aluminium alloy widely used in the…
The propagation path of quasistatic cracks under monotonic loading is known to be strongly influenced by the anisotropy of the fracture energy in crystalline solids or engineered materials with a regular microstructure. Such cracks…
We present a generalised phase field formulation for predicting high-cycle fatigue in metals. Different fatigue degradation functions are presented, together with new damage accumulation strategies, to account for (i) a typical S-N curve…
The broad application of polymer composites in engineering demands the deep understanding of the main damage mechanisms under realistic loading conditions and the development of proper physics-based models. Towards this goal, this study…
Fatigue fracture is one of the main causes of failure in structures. However, the simulation of fatigue crack growth is computationally demanding due to the large number of load cycles involved. Metals in the low cycle fatigue range often…
The failure of a component often is the result of a degradation process that originates with the formation of a crack. Fatigue describes the crack formation in the material under cyclic loading. Activation and deactivation operations of…
This paper describes a two-dimensional (2D) finite element simulation for fracture and fatigue behaviours of pure alumina microstructures such as those found at hip prostheses. Finite element models are developed using actual Al2O3…
Fatigue caused by cyclic bending of a piece of material, resulting in its mechanical failure, is a phenomenon that had been studied for ages by engineers and physicists alike. In this Letter we study such fatigue in a strip of athermal…
A novel FFT-based phase-field fracture framework for modelling fatigue crack initiation and propagation at the microscale is presented. A damage driving force is defined based on the stored energy and dislocation density, relating…
In this study, the effects of surface roughness and pore characteristics on fatigue lives of laser powder bed fusion (LPBF) Ti-6Al-4V parts were investigated. The 197 fatigue bars were printed using the same laser power but with varied…
The interaction between cracks, as well as their propagation, in single-crystal aluminum is investigated at the atomic scale using the molecular dynamics method and the modified embedded atom method. The results demonstrated that the crack…
The mechanical performance of reinforced composites is strongly influenced at different scales by the stress transferred at the matrix-fibre interfaces and at any surface where material discontinuity occurs. In particular, the mechanical…
Solids subjected to repeated cycles of stress or deformation can fail after several cycles, a phenomenon termed fatigue failure. Although intensely investigated for a wide range of materials owing to its obvious practical importance, a…
Strain-controlled fatigue of Mg-1Mn-0.5Nd (wt.\%) alloy were studied by experiment and simulation. The microstructure was made up of a dispersion of strongly texture grains (13\%) embedded in a matrix of grains with a random texture. The…
Fracture growth in a material is strongly influenced by the presence of inhomogeneities, which deviate crack trajectories from rectilinearity and deeply affect failure. Increasing crack tortuosity is connected to enhancement of fracture…
In this paper, two fatigue lifetime prediction models are tested on TiAl intermetallic using results from uniaxial low-cycle fatigue tests. Both assessments are based on dissipated energy but one of them considers a hydrostatic pressure…
Fatigue fracture in ductile materials, e. g. metals, is caused by cyclic plasticity. Especially regarding the high numbers of load cycles, plastic material models resolving the full loading path are computationally very demanding. Herein, a…
The effect of oscillatory shear deformation on the fatigue life, yielding transition, and flow localization in metallic glasses is investigated using molecular dynamics simulations. We study a well-annealed Cu-Zr amorphous alloy subjected…