Related papers: A new solution for mirror coating in $\gamma$-ray …
A conceptual design of an advanced Imaging Air Cherenkov Telescope with a 23 m diameter mirror and of 50 tons weight will be presented. A system photon detection efficiency of 15-17%, averaged over 300-600 nm, is aimed at to lower the…
Upgrades to ground-based gravitational-wave observatories will require mirror coatings with reduced thermal noise, enabling improved detector sensitivity and extended astrophysical reach. Recent studies have shown that optical coatings…
The reflector used by an imaging atmospheric Cherenkov telescope (IACT) consists of a tessellated array of mirrors mounted on a large frame. This arrangement allows for a very large reflecting surface with sufficient optical quality for the…
Advanced LIGO's present baseline design uses arm cavities with Gaussian light beams supported by spherical mirrors. Because Gaussian beams have large intensity gradients in regions of high intensity, they average poorly over fluctuating…
Mirror facets of the H.E.S.S. imaging atmospheric Cherenkov telescopes are aligned using stars imaged onto the closed lid of the PMT camera, viewed by a CCD camera. The alignment procedure works reliably and includes the automatic analysis…
We study the vacuum-induced degradation of high-finesse optical cavities with mirror coatings composed of SiO$_2$-Ta$_{2}$O$_{5}$ dielectric stacks, and present methods to protect these coatings and to recover their initial quality factor.…
In this paper, the development of the dual mirror Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a primary mirror diameter of 4 m, will be produced and installed at the CTA southern site.…
Imaging Atmospheric Cherenkov Telescopes (IACTs) need imaging optics with large apertures and high image intensities to map the faint Cherenkov light emitted from cosmic ray air showers onto their image sensors. Segmented reflectors fulfill…
The Cherenkov Telescope Array (CTA) is a large collaborative effort aimed at the design and operation of an observatory dedicated to the VHE gamma-ray astrophysics in the energy range 30 GeV-100 TeV, which will improve by about one order of…
The Cherenkov Telescope Array (CTA) is a future ground-based observatory for gamma-ray astronomy providing unparalleled sensitivity in the energy range from 20 GeV up to 300 TeV. CTA will consist of telescopes with three different sizes.…
Ground-level particle detection is now a well-established approach to TeV gamma-ray astronomy. Detection of Cherenkov light produced in water-filled detection units is a proven and cost-effective method. Here we discuss the optimization of…
The Cherenkov Telescope Array will be the next generation ground-based gamma ray observatory in the energy range from a few tens of GeV to hundreds of TeV. It will be built on two sites, one for each hemisphere, to cover the entire sky. The…
The LAMP (Lightweight Asymmetry and Magnetism Probe) X-ray telescope is a mission concept to measure the polarization of X-ray astronomical sources at 250 eV via imaging mirrors that reflect at incidence angles near the polarization angle,…
A new imaging atmospheric Cherenkov telescope (CANGAROO-II) with a light-weight reflector has been constructed. Light, robust, and durable mirror facets of containing CFRP (Carbon Fiber Reinforced Plastic) laminates were developed for the…
In this paper, an opto-thermal analysis of a moderately heated lightweighted solar telescope mirror is carried out using 3D finite element analysis (FEA). A physically realistic heat transfer model is developed to account for the radiative…
The Small Size Telescope with Single Mirror (SST-1M) is one of the proposed types of Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA). About 70 SST telescopes will be part the CTA southern array which will also include…
The Atmospheric Cherenkov Imaging Technique has opened up the gamma-ray spectrum from 100 GeV to 50 TeV to astrophysical exploration. The development of the technique (with emphasis on the early days) is described as are the basic…
We develop a novel hyperspectral imaging system using structured illumination in an SLM-based Michelson interferometer. In our design, we use a reflective SLM as a mirror in one of the arms of a Michelson interferometer, and scan the…
We have been successful in developing light and durable mirrors made of CFRP (Carbon Fiber Reinforced Plastic) laminates for the reflector of the new CANGAROO-II 7 m telescope. The reflector has a parabolic shape (F/1.1) with a 30 m^2…
The design of new low-mechanical-loss, high reflectivity mirrors is crucial in the development of the next generation of gravitational-wave observatories. Currently, the state-of-the-art amorphous multilayer reflective coatings which are…