Related papers: SINAP surface preparation processing for 500MHz su…
Niobium superconducting radiofrequency cavities enable applications in modern accelerators and quantum computers. However, the surface resistance significantly deteriorates the cavities performance. Nitrogen doping surface treatment can…
We report a surface treatment that systematically improves the quality factor of niobium radio frequency cavities beyond the expected limit for niobium. A combination of annealing in a partial pressure of nitrogen or argon gas and…
We describe a qubit encoded in continuous quantum variables of an rf superconducting quantum interference device. Since the number of accessible states in the system is infinite, we may protect its two-dimensional subspace from small errors…
Silicon's bandgap inherently restricts its photodetection to wavelengths below 1100 nm, necessitating the integration of costly III-V semiconductors for short-wave infrared applications. Hyperdoping silicon beyond the solid solubility limit…
In this study, we present new insights on the origin of the high-field Q-slope in superconducting radio-frequency cavities. Consequent hydrofluoric acid rinses are used to probe the radio-frequency performance as a function of the material…
Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits' quality can be…
In order to update the beam power from 100 kW to 250 kW in China spallation neutron source (CSNS) Phase II, one of the important measures is to replace the 80 meters long beam transport line between the present 80 MeV linac injector and the…
Using low energy electron diffraction (LEED), scanning tunnelling microscopy (STM) and x-ray absorption spectroscopy (XAS) techniques, we have studied the first steps of silicon adsorption onto Cu (001) single crystal substrate. For low…
We present a first-principles study of semiconducting carbon nanotubes adsorbed on the unpassivated Si(100) surface. We have found metallicity for the combined system caused by n-doping of the silicon slab representing the surface by the…
Despite several decades of development, microfluidics lacks a sealing material that can be readily fabricated, leak-tight under high liquid water pressure, stable over a long time, and vacuum compatible. In this paper, we report the…
Silicon lasers have been the most challenging element for the monolithic integrated Si photonics. Here we report the first successful all-Si laser at room temperature based on silicon nanocrystals (Si NCs) with high optical gains. The…
During the last ten years, superconducting circuits have passed from being interesting physical devices to becoming contenders for near-future useful and scalable quantum information processing (QIP). Advanced quantum simulation experiments…
In multilayered high-Tc cuprates with three or more CuO2 layers per unit cell, the inner CuO2 planes (IPs) are spatially separated from the dopant layers and thus remain cleaner than the outer planes (OPs). While both interlayer coupling…
The RF design of a 325MHz {\beta}=0.37 superconducting double spoke cavity for China ADS has been finished. In this paper, the optimization of the spoke cavity is described in detail. The main goal in the RF design is to decrease the…
Superconducting scanning tunneling microscope tips have been fabricated with a high degree of reproducibility. The fabrication process relies on sequential deposition of superconducting Pb and a proximity-coupled Ag capping layer onto a…
Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 ohm.cm and 0.02 ohm.cm) in hydrofluoric (HF) acid of 24.5 precent…
The integration of III-V on silicon is still a hot topic as it will open up a way to co-integrate Si CMOS logic with photonic vices. To reach this aim, several hurdles should be solved, and more particularly the generation of antiphase…
Studying the polarization and spectral distortion of the Cosmic Microwave Background (CMB) in tandem with intensity fluctuations of the Cosmic Infrared Background (CIB) allows us to verify our assumptions on cosmic inflation and investigate…
We have demonstrated the fabrication and characterization of 2D liquid-based multimode optical waveguide structures over a Polydimethylsiloxane (PDMS) material-based chip. Fabrication of two separate microstructures, one with a width of 14…
Encapsulation layers are explored for passivating the surfaces of silicon to reduce optical absorption in the 1500-nm wavelength band. Surface-sensitive test structures consisting of microdisk resonators are fabricated for this purpose.…