Related papers: Gigahertz Self-referenceable Frequency Comb from a…
Single-cycle optical pulses offer a strong carrier-envelope-offset (CEO) dependent electric field and the highest peak intensity for a given pulse energy. Absence of demonstrated GHz single-cycle lasers constrains exploration of…
Optical frequency combs based on mode-locked lasers have revolutionized many areas of science and technology, such as precision metrology, optical frequency synthesis or telecommunications. In recent years, a particular kind of frequency…
A single transverse mode high pulse-energy VECSEL was developed. The GaSb based VECSEL emits at a wavelength of 2.04 microns with a peak power exceeding 500W while maintaining good beam quality. The cavity employs a Pockels cell combined…
Low noise and high repetition rate optical frequency combs are desirable for many applications from timekeeping to precision spectroscopy. For example, gigahertz repetition rate sources greatly increase the acquisition speed of spectra in a…
We demonstrate the first microchip semiconductor membrane external-cavity surface-emitting laser. This compact type of laser consists solely of a semiconductor gain region present as a micron-thin membrane, sandwiched between two…
We present a new type of dual optical frequency comb source capable of scaling applications to high measurement speeds while combining high average power, ultra-low noise operation, and a compact setup. Our approach is based on a…
We report an all-polarization-maintaining fiber optic approach to generating sub-2 cycle pulses at 2 {\mu}m and a corresponding octave-spanning optical frequency comb. Our configuration leverages mature Er:fiber laser technology at 1.5…
This paper reports the demonstration of high-speed PAM-4 transmission using a 1.5-{\mu}m single-mode vertical cavity surface emitting laser (SM-VCSEL) over multicore fiber with 7 cores over different distances. We have successfully…
A compact and robust coherent laser light source that provides spectral coverage from the ultraviolet to infrared is desirable for numerous applications, including heterodyne super resolution imaging[1], broadband infrared microscopy[2],…
A fully stabilized frequency comb is essential for precision metrology and coherent optical synthesis. However, fully-stabilized frequency combs generally require separate stages for supercontinuum generation (SCG) and self-referencing,…
Beginning with a continuous wave laser at 1064 nm, we generate a 30 GHz electro-optic frequency comb which contains 100 lines spanning 3 THz. The initial comb is subsequently amplified, spectrally broadened in normal dispersion photonic…
We report a mode-locked Ti:sapphire femtosecond laser with 5GHz repetition rate. Spectral broadening of the 24 fs pulses in a microstructured fiber yields an octave-spanning spectrum and permits self-referencing and active stabilization of…
We phase-coherently measure the frequency of continuous-wave (CW) laser light by use of optical-phase modulation and f-2f nonlinear interferometry. Periodic electro-optic modulation (EOM) transforms the CW laser into a continuous train of…
We present a laser frequency comb based upon a 250 MHz mode-locked erbium-doped fiber laser that spans more than 300 terahertz of bandwidth, from 660 nm to 2000 nm. The system generates 1.2 nJ, 70 fs pulses at 1050 nm by amplifying the 1580…
Modelocked frequency comb lasers have always operated with a single pulse circulating in the laser cavity. This meant that each laser technology had an associated limit on pulse repetition rate. Achieving higher rates required different…
We demonstrate amplification-free carrier-envelope offset (fCEO) detection in parabolically width-modulated z-cut thin-film lithium niobate (TFLN) waveguide that simultaneously engineers dispersion and enhances nonlinear interactions. With…
Ultrafast laser systems operating with high-average power in the wavelength range from 1.9 um to 3 um are of interest for a wide range of applications for example in spectroscopy, material processing and as drivers for secondary sources in…
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than…
Vertical external-cavity surface-emitting lasers (VECSELs) augmented by intra-cavity nonlinear optical frequency conversion have emerged as an attractive light source of ultraviolet to visible light for demanding scientific applications,…
We report on an optical frequency comb with 14nm (~1.8 THz) spectral bandwidth at -3 dB level that is generated using a passively mode-locked quantum-well (QW) laser in photonic integrated circuits (PICs) fabricated through an InP generic…