Related papers: Step-emulsification in nanofluidic device
We experimentally and theoretically investigate the behavior of Leidenfrost droplets inserted in a Hele-Shaw cell. As a result of the confinement from the two surfaces, the droplet has the shape of a flattened disc and is thermally isolated…
We report an easy-to-implement method that allows the direct generation of water-in-water (w/w) single emulsions. The method relies on direct perturbation of the pressure that drives the flow of the dispersed phase of the emulsions. The…
We present a novel microfluidic method to produce quasi-monodisperse bubbles with diameters from tens to very few microns. A gaseous rivulet flows over the shallow groove printed on a T-junction exit channel. The triple contact line…
The generation of microdroplets via segmentation in microfluidic devices is of interest in many applications, from biochemical to pharmaceutical. This technique permits indeed much higher control on the droplet size, uniformity and…
Droplet generation under steady conditions is a common microfluidic method for producing biphasic systems. However, this process works only over a limited range of imposed pressure: beyond a critical value, a stable liquid jet can instead…
The method of formation of nanoparticle aggregates such as high-coverage spherical shells of microspheres or 3-D micro crystals grown in the geometry unaffected by a substrate is described. In the reported experiment, the evaporation of…
This chapter presents an overview of microfluidic devices reported in the literature, used to develop methodologies for nucleation of biomolecules, with crystal size control, and for collecting thermodynamic and kinetic data. Part I is…
Topology changes in multi-phase fluid flows are difficult to model within a traditional sharp interface theory. Diffuse interface models turn out to be an attractive alternative to model two-phase flows. Based on a…
We propose a continuum theory of the liquid-liquid phase separation in an elastic network where phase-separated microscopic droplets rich in one fluid component can form as an interplay of fluids mixing, droplet nucleation, network…
The flow of liquid helium through a single nanohole with radius smaller than 25 nm was studied for the first time. Mass flow was induced by applying a pressure difference of up to 1.4 bar across a 50 nm thick Si3N4 membrane and was measured…
The injection of a fluid into another of larger viscosity in a Hele-Shaw cell usually results in the formation of highly branched patterns. Despite the richness of these structures, in many practical situations such convoluted shapes are…
A model has been developed to describe the collision and possible coalescence of two driven deformable drops in the Hele-Shaw cell. The interdependence between hydrodynamic effects and interfacial deformations is characterised by a film…
A way forward for high throughput fabrication of microcapsules with uniform size and mechanical properties was reported irrespective of the kinetic process of shell assembly. Microcapsules were produced using lab-scale emulsification…
We present a microfluidic platform for two-dimensional manipulation of water droplets immersed in bulk oil-based ferrofluid. Although non-magnetic, the droplets are exclusively controlled by magnetic fields, without any pressure-driven…
Electrohydrodynamic (EHD) generation, a commonly used method in BioMEMS, plays a significant role in the pulsed-release drug delivery system for a decade. In this paper, an EHD based drug delivery system is well designed, which can be used…
Scalable technologies for the production of bio-compatible complex microfibers with controllable size and composition at competitively high throughput are urgently needed in order to meet the growing demand for such microstructures in…
When processing dense emulsions, complex flows stretch and deform droplets to the point of breakup, changing the droplet size distribution and the mechanical properties of the final product. For steady homogeneous flows, a droplet's shape…
Liquid dispensing and writing in the extremely small size regime are important for applications in many current technologies, such as micro/nano fabrication, biological/chemical patterning and analysis, and drug discovery. Most of current…
In this paper we present PDE and finite element analyses for a system of partial differential equations (PDEs) consisting of the Darcy equation and the Cahn-Hilliard equation, which arises as a diffuse interface model for the two phase…
Displacement experiments carried out in microfluidic porous media analogs show that reduced surface tension leads to a more stable displacement, opposite to the process in Hele-Shaw cells where surface tension stabilizes the displacement of…