Related papers: Stable Lithium Electrodeposition in Liquid and Nan…
The path toward Li-ion batteries with higher energy-densities will likely involve use of thin lithium metal (Li) anode (<50 $\mu$m in thickness), whose cyclability today remains limited by dendrite formation and low Coulombic efficiency.…
Lithium phosphorus oxynitride (LiPON) is a well-known amorphous thin film solid electrolyte that has been extensively studied in the last three decades. Despite the promises to pair with Li metal anode and various cathode materials, the…
Silicon is a promising candidate for negative electrodes due to its high theoretical specific capacity (~3579 mAh g-1) and low lithiation potential (~0.40 V vs Li). However, its practical applications in battery have been inhibited by the…
Superoxide-based non-aqueous metal oxygen batteries have received considerable research attention, as they exhibit high energy densities and round-trip efficiencies. The cycling performance, however, is still poor. Here we study the cycling…
Ionic behaviors, including ion distributions and hydration characteristics at solid-liquid interfaces, are important research interests in many important applications, such as electric double-layer capacitors and water lubrication. Here, we…
Solid-state lithium batteries (SLBs) offers a promising avenue for the development of next-generation lithium-ion batteries with ultrahigh energy density and safety performance. This review provides a quick overview of the state-of-the-art…
Polymer electrolytes present a promising solution to the challenges posed by aqueous electrolytes in energy storage systems, offering the flexibility needed for wearable electronics. Despite the increasing interest in polymer…
The microscopic and fundamental origin of slide electrification, where droplets of water move across insulating surfaces accumulating and depositing electrical charges, is still debated. Charge transfer is often attributed to ion transfer…
Polymer electrolytes (PEs) are promising candidates for use in next-generation high-voltage batteries, as they possess advantageous elastic and electrochemical properties. However, PEs still suffer from low ionic conductivity and need to be…
A nonequilibrium thermodynamic model is presented for the nonisothermal lithium-ion battery cell. Coupling coefficients, all significant for transport of heat, mass, charge and chemical reaction, were used to model profiles of temperature,…
This study is concerned with modeling detrimental deformations of the binder phase within lithium-ion batteries that occur during cell assembly and usage. A two-dimensional poroviscoelastic model for the mechanical behavior of porous…
In a previous paper [S. Ghosal, Phys. Rev. E 74, 041901 (2006)] a hydrodynamic model for determining the electrophoretic speed of a polyelectrolyte through an axially symmetric slowly varying nanopore was presented in the limit of a…
We present a coupled continuum formulation for the electrostatic, chemical, thermal, mechanical and fluid physics in battery materials. Our treatment is at the particle scale, at which the active particles held together by carbon-binders,…
The performances of lithium-ion batteries are set by the electrodes materials capacity to exchange lithium ions and electrons faster and reversibly. To this goal Ni-rich layered metal oxides, especially LiNiO2, are attractive electrode…
A major challenge in the development of new battery materials is understanding their fundamental mechanisms of operation and degradation. Their microscopically inhomogeneous nature calls for characterization tools that provide operando and…
The degradation mechanism in a sodium cell of a layered Na0.48Al0.03Co0.18Ni0.18Mn0.47O2 (NCAM) cathode with P3/P2 structure is investigated by revealing the changes in microstructure and composition upon cycling. The work aims to…
Cycle life is critically important in applications of rechargeable batteries, but lifetime prediction is mostly based on empirical trends, rather than mathematical models. In practical lithium-ion batteries, capacity fade occurs over…
Next-generation high-efficiency Li-ion batteries require an electrolyte that is both safe and thermally stable. A possible choice for high performance all-solid-state Li-ion batteries is a liquid crystal, which possesses properties…
Electroconvection in rechargeable batteries enhances the growth of dendrites at the electrode surface. The addition of low molecular weight polymers to the electrolyte in batteries results in the formation of a thin layer of higher polymer…
Higher energy density and longer lifetime are the requirements for next-generation lithium-ion batteries. A promising anode material is silicon, which offers high specific capacity, but its significant volume change during lithiation and…