Related papers: Hardware Efficient WiMAX Deinterleaver Capable of …
To address 5G challenges, IEEE 802.11 is currently developing new amendments to the Wi-Fi standard, the most promising of which is 802.11ax. A key scenario considered by the developers of this amendment is dense and overlapped networks…
Scaling the number of antennas up is a key characteristic of current and future wireless communication systems. The hardware cost and power consumption, however, motivate large-scale MIMO systems, especially at millimeter wave (mmWave)…
The new IEEE 802.11 standard, IEEE 802.11ax, has the challenging goal of serving more Uplink (UL) traffic and users as compared with his predecessor IEEE 802.11ac, en- abling consistent and reliable streams of data (average throughput) per…
In this paper, we propose Transmission Control Protocol (TCP)-aware cross layer scheduling algorithms in a multipoint-to-point network such as the uplink of an IEEE 802.16 (WiMAX) network. Inadequate bandwidth allocation to a TCP flow may…
For high throughput applications, turbo-like iterative decoders are implemented with parallel architectures. However, to be efficient parallel architectures require to avoid collision accesses i.e. concurrent read/write accesses should not…
The effects of the odd-even constraint - as an interleaver design criterion - on the performance of rate-1/2 binary turbo codes are revisited. According to the current understanding, its adoption is favored because it makes the information…
IEEE 802.11ay defines new PHY and MAC specifications that enable 100 Gbps communications in the 60 GHz millimeter-wave (mmWave) band. Among the various use cases supported by IEEE 802.11ay, fixed wireless access, a cost-efficient…
An efficient decoding algorithm for horizontally u-interleaved LRPC codes is proposed and analyzed. Upper bounds on the decoding failure rate and the computational complexity of the algorithm are derived. It is shown that interleaving…
Scaling up hardware systems has become an important tactic for improving performance as Moore's law fades. Unfortunately, simulations of large hardware systems are often a design bottleneck due to slow throughput and long build times. In…
In this paper, we design a simple, low-cost, and low-power wake-up receiver which can be used for an IEEE 802.11-compliant device to remotely wake up the other devices by utilizing its own wireless LAN (WLAN) signals. The employed wake-up…
As fifth-generation (5G) and upcoming sixth-generation (6G) communications exhibit tremendous demands in providing high data throughput with a relatively low latency, millimeter-wave (mmWave) technologies manifest themselves as the key…
The millimeter-wave (mmWave) technology, recently standardized by IEEE 802.11ad, is emerging as an attractive alternative to the traditional 2.4/5GHz wireless systems, promising multi-Gigabit wireless throughput. However, the high…
We consider the sizing of network buffers in 802.11 based networks. Wireless networks face a number of fundamental issues that do not arise in wired networks. We demonstrate that the use of fixed size buffers in 802.11 networks inevitably…
We have implemented interference alignment (IA) and joint transmission coordinated multipoint (CoMP) on a wireless testbed using the feedback compression scheme of the new 802.11ac standard. The performance as a function of the frequency…
Intersession network coding (NC) can provide significant performance benefits via mixing packets at wireless routers; these benefits are especially pronounced when NC is applied in conjunction with intelligent link scheduling. NC however…
Channel uncertainty and co-channel interference are two major challenges in the design of wireless systems such as future generation cellular networks. This paper studies receiver design for a wireless channel model with both time-varying…
In low power wireless sensor networks, MAC protocols usually employ periodic sleep/wake schedule to reduce idle listening time. Even though this mechanism is simple and efficient, it results in high end-to-end latency and low throughput. On…
IEEE specifies different modulation techniques for WiMAX; namely, BPSK, QPSK, 16 QAM and 64 QAM. This paper studies the performance of Internet Protocol Television (IPTV) over Fixed WiMAX system considering different combinations of digital…
Detection algorithms for multiple-input multiple-output (MIMO) wireless systems based on orthogonal frequency-division multiplexing (OFDM) typically require the computation of a QR decomposition for each of the data-carrying OFDM tones. The…
The increasing interest for ubiquitous networking, and the tremendous popularity gained by IEEE 802.11 Wireless Local Area Networks (WLANs) in recent years, is leading to very dense deployments where high levels of channel contention may…