Related papers: Waveguide Model for Thick Complementary Split Ring…

In this paper, a Frequency Selective Surface fractalized unit cell design previously explored in the literature is replicated then extended and optimized for multilayer FSS morphologies. A 10 mm x 10 mm planar unit cell is used and then…

We demonstrate high-resolution photonic RF filters using an RF bandwidth scaling approach based on integrated Kerr optical micro-combs. By employing both an active nonlinear micro-ring resonator (MRR) as a high-quality micro-comb source and…

Angle-selective optical devices are of importance to several applications such as photovoltaics, high-sensitivity photodetectors and displays. There are several approaches to realizing angular selectivity, but it remains challenging to…

We apply adaptive sensing techniques to the problem of locating sparse metallic scatterers using high-resolution, frequency modulated continuous wave W-band RADAR. Using a single detector, a frequency stepped source, and a lateral…

In this paper, a novel water-based reconfigurable frequency selective rasorber (FSR) at microwave band is proposed, which has a thermally tunable absorption band above the transmission band. The water-based FSR consists of a bandpass type…

Reconfigurable intelligent surface (RIS) can improve the communications between a source and a destination. Recently, continuous aperture RIS is proved to have better communication performance than discrete aperture RIS and has received…

This paper investigates the broadband channel estimation (CE) for intelligent reflecting surface (IRS)-aided millimeter-wave (mmWave) massive MIMO systems. The CE for such systems is a challenging task due to the large dimension of both the…

Subwavelength metallic resonators provide a route to achieving strong light-matter coupling by means of tight confinement of resonant electromagnetic fields. Investigation of such resonators however often presents experimental difficulties,…

We describe the design, fabrication, integration and characterization of a prototype superconducting filter bank with transition edge sensor readout designed to explore millimetre-wave detection at frequencies in the range 40 to 65 GHz.…

Multiple scattering theory is applied to the study of clusters of point-like scatterers attached to a thin elastic plate and arranged in quasi-periodic distributions. Two type of structures are specifically considered: the twisted bilayer…

This work gives a blind beamforming strategy for intelligent reflecting surface (IRS), aiming to boost the received signal-to-noise ratio (SNR) by coordinating phase shifts across reflective elements in the absence of channel information.…

We construct a low-temperature microwave waveguide interferometer for measuring high-frequency properties of two-dimensional electron gases (2DEGs). Coupled plasmon-cyclotron resonance (PCR) spectra are used to extract effective mass, bulk…

We introduce the concept of a metasurface system able to route space wave via surface waves. This concept may be used to laterally shift or modulate the beam width of scattered waves. We propose two corresponding synthesis techniques, one…

In this work, we study the statistically robust beamforming design for an intelligent reflecting surfaces (IRS) assisted multiple-input single-output (MISO) wireless system under imperfect channel state information (CSI), where the channel…

We designed and successfully fabricated an absorption-type of superconducting coplanar waveguide (CPW) resonators. The resonators are made from a Niobium film (about 160 nm thick) on a high-resistance Si substrate, and each resonator is…

In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting…

Thin, penetrable electromagnetic inclusions buried within a half space are retrieved from Multi-Static Response (MSR) matrix data collected above this half space at several frequencies. A non-iterative algorithm is proposed to that aim. It…

We numerically demonstrate a new type of waveform-selective metasurface that senses the difference in incoming waveforms or pulse widths at the same frequency. Importantly, the proposed structure contains precise rectifier circuits that,…

Reconfigurable Intelligent Surfaces (RISs) have attracted major attention in the last few years, thanks to their useful characteristics. An RIS is a nearly passive thin surface that can dynamically change the reradiated field, and can…

Reconfigurable intelligent surface (RIS) is a two-dimensional periodic structure integrated with a large number of reflective elements, which can manipulate electromagnetic waves in a digital way, offering great potentials for wireless…