Related papers: Obstructed Telescopes vs Unobstructed Telescopes f…

After launching and deploying a sparse space telescope, fine tuning is required to correct for inaccurate initial placement of its elements. We selected unique shapes and locations of these telescope aperture segments, to be able to…

Light field microscopy (LFM) uses a microlens array (MLA) near the sensor plane of a microscope to achieve single-shot 3D imaging of a sample without any moving parts. Unfortunately, the 3D capability of LFM comes with a significant loss of…

We present the design of the prototype telescope and spectrograph system for the Affordable Multiple Aperture Spectroscopy Explorer (AMASE) project. AMASE is a planned project that will pair 100 identical multi-fiber spectrographs with a…

We have used a precision calibrated photodiode as the fundamental metrology reference in order to determine the relative throughput of the PanSTARRS telescope and the Gigapixel imager, from 400 nm to 1050 nm. Our technique uses a tunable…

In this paper, we report the first experimental demonstration of a Temporal HyperTelescope (THT). Our breadboard including 8 telescopes is firstly tested in a manual cophasing configuration on a 1D object. The Point Spread Function (PSF) is…

The paper describes the MAGIC multi-mode focal reducer (Monitoring of Active Galaxies by Investigation of their Cores), commissioned on the 1-m Zeiss-1000 telescope of the Special Astrophysical Observatory of the Russian Academy of Sciences…

We examined the anisotropic point spread function (PSF) of Suprime-Cam data utilizing dense star field data. We decomposed the PSF ellipticities into three components, the optical aberration, atmospheric turbulence, and chip-misalignment in…

Multi-mode fiber (MMF) endoscopes are a new type of endoscope that use only a single optical fiber to transmit images, achieving much higher spatial resolution for a given diameter than commercial fiber bundle endoscopes. However, a…

The absolute reflectance of a reflector and its point spread function are the key parameters of a telescope for measuring light flux. Typically, one is using low-cost technologies for producing mirrors for the needs of astro-particle…

We describe a camera beam simulator for the LSST which is capable of illuminating a 60mm field at f/1.2 with realistic astronomical scenes, enabling studies of CCD astrometric and photometric performance. The goal is to fully simulate LSST…

Reconstructing transparent surfaces is essential for tasks such as robotic manipulation in labs, yet it poses a significant challenge for 3D reconstruction techniques like 3D Gaussian Splatting (3DGS). These methods often encounter a…

We present a theoretical analysis of the measuring algorithm we use when applying the Diffracto-Astrometry technique to Hubble Space Telescope Wide Field Planetary Camera 2 (WFPC2) saturated stellar images. Theoretical Point Spread…

Technological advances will allow the placement of many Terahertz detectors at the focal plane of a single telescope. For a telescope of a given diameter and wavelength of operation, there is a limit to the number of usable detectors…

High-angular-resolution imaging is crucial for many applications in modern astronomy and astrophysics. The fundamental diffraction limit constrains the resolving power of both ground-based and spaceborne telescopes. The recent idea of a…

This paper presents an integrated modeling software to analyze the PSF of wide-field telescopes affected by misalignments. Even relatively small misalignments in the optical system of a telescope can significantly deteriorate the image…

We show that with spatially incoherent illumination, the point spread function width of an imaging interferometer like that used in full-field optical coherence tomography (FFOCT) is almost insensitive to aberrations that mostly induce a…

As part of the astrometric Hubble Space Telescope (HST) large program GO-12911, we conduct an in-depth study to characterize the point spread function (PSF) of the Uv-VISual channel (UVIS) of the Wide Field Camera 3 (WFC3), as a necessary…

Diffraction experiments have moved to ever heavier objects in recent years, now standing at the level of large molecules. Experiments in materials science on the other hand have come down to ever smaller sizes largely due to the success of…

The spectral resolution of a dispersive astronomical spectrograph is limited by the trade-off between throughput and the width of the entrance slit. Photonic guided-wave transitions have been proposed as a route to bypass this trade-off, by…

Type Ia supernovae are the most direct cosmological probe to study dark energy in the recent Universe, for which the photometric calibration of astronomical instruments remains one major source of systematic uncertainties. To address this,…