Related papers: Inversely Prepolarized Piezoceramic Cantilever
This paper investigates the deflection of micro- electro-mechanical system (MEMS) based sandwiched cantilever beam for piezoelectric actuation using eight of the popular lead zirconatetitanate (PZT)piezoceramic material. The simulation for…
The structure and dielectric properties of 6% $\rm{Sr}^{2+}$-substituted, modified Lead Zirconium Titanate (PZT) piezoelectric ceramic, with composition…
A high quality factor (Q-factor) piezoelectric lead zirconat titanate (PZT) actuated single crystal silicon cantilever was proposed in this paper for resonant based ultra-sensitive mass detection. Energy dissipation from intrinsic…
The three dimensional vibrations in a periodically poled ZX-cut Lithium Niobate thin bar with 0.3-mm long domains are considered. The acoustical vibrations may be excited by the 1) longitudinal acousto-electric current when a radio…
This paper compares the performances of a vibrationpowered electrical generators using PZT piezoelectric ceramic associated to two different power conditioning circuits. A new approach of the piezoelectric power conversion based on a…
A multidomain two-dimensional periodically poled ferroelectric plate vibrator is reported for the first time. The theoretical calculations, computer simulations by the Finite Element Method and experimental data from the lithium tantalite…
The widely used ferroelectric ceramics based actuators always suffer from small output strains (typically ~0.1-0.15%). Non-180{\deg} domain switching can generate large strain in ferroelectrics but it is usually irreversible. In this work,…
The electrical response of two-dimensional electron gas to vibrations of a nanomechanical cantilever containing it is studied. Vibrations of perpendicularly oriented cantilevers are experimentally shown to change oppositely the conductivity…
A piezoelectric voltage coupled microwave reentrant cavity has been developed. The central cavity post is bonded to a piezoelectric actuator allowing the voltage control of small post displacements over a high dynamic range. We show that…
High performance lead zirconate titanate (PZT) ceramics with aligned porosity for sensing applications were fabricated by an ice-templating method. To demonstrate the enhanced properties of these materials and their potential for sensor and…
We describe and demonstrate a method by which the nonlinear piezoelectric properties of a piezoelectric material may be measured by detecting the force that it applies on a suspended micromechanical resonator at one of its mechanical…
Fabrication of the bimorph lithium niobate cantilevers involves a micro machining of a z-cut wafer to create a multidomain structure. After etching, the bimorph ferroelectric cantilevers are fabricated at the locations near interdomain…
The energy harvesting capability of resonant harvesting structures, such as piezoelectric cantilever beams, can be improved by utilizing coupled oscillations that generate favourable strain mode distributions. In this work, we present the…
A key property that drives research in ferroelectric perovskite oxides is their strong piezoelectric response in which an electric field is induced by an applied strain, and vice-versa for the converse piezoelectric effect. We have achieved…
We investigate the nonlinear vibration of a fractional viscoelastic cantilever beam, subject to base excitation, where the viscoelasticity takes the general form of a distributed-order fractional model, and the beam curvature introduces…
In this paper, we compare the performance of 8 PZT ceramics and one PMN-PT material for typical bending actuator applications. This includes the measurement of non-linear transverse charge coefficient at high electric field strength and…
Online and real-time sensing and monitoring of the health state of complex structures, such as aircraft and critical components of power stations, are essential aspects of research in dynamics. Several types of sensors are used to capture…
Piezoelectric resonators are a common building block for signal processing because of their miniature size, low insertion loss, and high quality factor. As consumer electronics push to millimeter waves frequencies, designers must increase…
Eigen frequency is one of the most important system responses to be considered while designing a micro-scale piezoelectric cantilever beam. This paper investigates and analyzes the effect of dimension parameters of a micro-scale…
Measurements of the deflection induced by thermal noise have been performed on a rectangular atomic force microscope cantilever in air. The detection method, based on polarization interferometry, can achieve a resolution of 1E-14 m/rtHz in…