Related papers: User Effects in Beam-Space MIMO
The use of a very large number of antennas at each base station site (referred to as "Massive MIMO") is one of the most promising approaches to cope with the predicted wireless data traffic explosion. In combination with Time Division…
Integrated sensing and communication (ISAC) has been regarded as a key technology for 6G wireless communications, in which large-scale multiple input and multiple output (MIMO) array with higher and wider frequency bands will be adopted.…
The one-bit spatial Sigma-Delta concept has recently been proposed as an approach for achieving low distortion and low power consumption for massive multi-input multi-output systems. The approach exploits users located in known angular…
At millimeter wave (mmWave) frequencies, the higher cost and power consumption of hardware components in multiple-input multiple output (MIMO) systems do not allow beamforming entirely at the baseband with a separate radio frequency (RF)…
Given the high throughput requirement for 5G, merging millimeter wave technologies and multi-user MIMO seems a very promising strategy. As hardware limitations impede to realize a full digital architecture, hybrid MIMO architectures, using…
MIMO communication may provide high spectral efficiency through the deployment of a very large number of antenna elements at the base stations. The gains from massive MIMO communication come from the use of multi-user MIMO on the uplink and…
This paper considers a multi-way massive multiple-input multiple-output relaying system, where single-antenna users exchange their information-bearing signals with the help of one relay station equipped with unconventionally many antennas.…
While interference alignment schemes have been employed to realize the full multiplexing gain of $K$-user interference channels, the analyses performed so far have predominantly focused on the case when global channel knowledge is available…
This paper studies the performance of single-input multiple-output (SIMO) systems under receive antenna selection (RAS) and BPSK/QPSK modulations. At the receiver, a subset of branches are selected and combined using maximal-ratio combining…
In this paper, we investigated the capacity and bit error rate (BER) performance of Multiple Input Multiple Output (MIMO) satellite systems with single and multiple dual polarized satellites in geostationary orbit and a mobile ground…
In this paper we aim to solve the multiuser multi-input multi-output (MIMO) downlink beamforming problem where one multi-antenna base station broadcasts data to many users. Each user is assigned multiple data streams and has multiple…
In this paper, a downlink communication system, in which a Base Station (BS) equipped with $M$ antennas communicates with $N$ users each equipped with $K$ receive antennas, is considered. An efficient suboptimum algorithm is proposed for…
We analyze the uplink radio frequency (RF) interference from a multiplicity of single-antenna user equipments transmitting to a cellular base station (BS) within the same time-frequency resource. The BS is assumed to operate with a lens…
Contemporary wireless communications systems adopt the Multi-User Multiple-Input Multiple-Output (MU-MIMO) technique: a single base station or Access Point (AP) equipped with multiple antenna elements serves multiple active users…
Since the spectrum below 6 GHz bands is insufficient to meet the high bandwidth requirements of 5G use cases, 5G networks expand their operation to mmWave bands. However, operation at these bands has to cope with a high penetration loss and…
Both antenna selection and spatial modulation allow for low-complexity MIMO transmitters when the number of RF chains is much lower than the number of transmit antennas. In this manuscript, we present a quantitative performance comparison…
The focus of this paper is on multi-user MIMO transmissions for millimeter wave systems with a hybrid precoding architecture at the base-station. To enable multi-user transmissions, the base-station uses a cell-specific codebook of…
Massive MIMO systems promise high data rates by employing large number of antennas, which also increases the power usage of the system as a consequence. This creates an optimization problem which specifies how many antennas the system…
Multiple Input Multiple Output (MIMO) adds a new dimension to be exploited in Cognitive Radio (CR) by simultaneously serving several users. The spatial domain that is added through MIMO is another system resource that has to be optimized,…
This paper considers the joint design of user power allocation and relay beamforming in relaying communications, in which multiple pairs of single-antenna users exchange information with each other via multiple-antenna relays in two time…