Related papers: New Parameter in Polymer - Assisted Sol - Gel Depo…
Fe2O3 nanoparticles of different sizes ranging from 22 to 56nm were synthesized chemically by a modified sol-gel method. Pure alpha phase particles as well as particles with admixture of alpha and gamma phase were obtained and identified by…
A process of atomic layer deposition combined with self assembled monolayers was used to investigate the possible modification of polyurethane paint surfaces. First, we used an ALD process to produce thin and uniform Al2O3 coatings of these…
Control of thin film stoichiometry is of primary relevance to achieve desired functionality. Pulsed laser deposition ablating from binary-oxide targets (sequential deposition) can be applied to precisely control the film composition,…
Ce/Cr codoped TiO2 nanoparticles were synthesized using sol gel and Pechini methods with heat treatment at 400 C for 4 h. A conventional sol gel process produced well-crystallized anatase, while Pechini synthesis yielded less ordered…
We report the controllability of a gelation surface pattern formation. Recently, we have found and studied a novel kind of pattern formation that occurs during a radical polymerization (gelation) process. The pattern formation is observed…
We present further evidence that gelation is an arrested phase separation in attractive colloid-polymer mixtures, based on a method combining confocal microscopy experiments with numerical simulations recently established in {\bf Nature…
The (001)SrTiO3 crystal surface can be engineered to display a self-organized pattern of well-separated and nearly pure single-terminated SrO and TiO2 regions by high temperature annealing in oxidizing atmosphere. By using surface sensitive…
Ba0.6Sr0.4TiO3 nanoparticles were synthesized by the sol-gel method. The effects of the heat treatment conditions, ethylene glycol (EG) and deionized water (DW) on their phase structure and formation of the undesirable barium carbonate…
Dewetting of thin polystyrene films deposited onto silicone wafers at temperatures close to the glass transition exhibits unusual dynamics and front morphologies. Here, we present a new theoretical approach of these phenomena taking into…
Highly oriented VO2 thin films were grown on sapphire substrates by the sol-gel method that includes a low pressure annealing in an oxygen atmosphere. This reduction process effectively promotes the formation of the VO2 phase over a…
The aim of this article is to decrease the crystallization temperature of the tetragonal perovskite PbTiO3 nanopowders below the PbTiO3 Curie temperature. At the beginning of our study, the calcination temperature was selected based on the…
A small amount of polymer dissolved in a droplet suppresses droplet rebound when it impinges on a supersolvophobic surface. This work investigates impacting dynamics of a droplet of dilute polymer solution depending on the molecular weight…
We exploit a precipitation-redispersion mechanism for complexation of short chain polyelectrolytes with cerium oxide nanoparticles to extend their stability ranges. As synthesized, cerium oxide sols at pH 1.4 consist of monodisperse…
In enzymatic recycling or biodegradation of semi-crystalline plastic waste, crystalline spherulites embedded into an amorphous matrix hinder and slow down depolymerisation. When the enzymatic depolymerisation temperature exceeds the glass…
Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix are synthesized by a novel two-step surfactant sol-gel strategy, where the processes of hydrolysis, polycondensation and drying take place in a one-pot. The…
Integrated photoelasticity is investigated for a soft material subjected to a three-dimensional stress state. In the experiment, a solid sphere is pressed against a gelatin gel (Young's modulus is about 4.2 kPa) that deforms up to 4.5 mm…
Polymer gels are comprised of a three-dimensional, cross-linked network that can typically withstand the mechanical deformation associated with both swelling and de-swelling. Thus, gels can be designed with smart behaviors that require both…
We present here the preliminary results obtained for two experiments on randomly agitated granular assemblies using a novel way of shaking. First we discuss the transport properties of a 2D model system undergoing classical shaking that…
Colloidal spheres synthesized from polymer gels swell by absorbing molecules from solution. The resulting change in size can be monitored with nanometer precision using holographic video microscopy. When the absorbate is chemically similar…
The heat-treatment of a number of gas atomised aluminium alloys prior to cold spraying recently showed that the resultant microstructural modification was accompanied by an improvement in deposition; however, the relationship between the…