Related papers: Loss in long-storage-time optical cavities
We have developed a technique to measure the absolute frequencies of optical transitions by using an evacuated Rb-stabilized ring-cavity resonator as a transfer cavity. We study possible wavelength-dependent errors due to dispersion at the…
Thermally induced fluctuations impose a fundamental limit on precision measurement. In optical interferometry, the current bounds of stability and sensitivity are dictated by the excess mechanical damping of the high-reflectivity coatings…
Nearly concentric optical cavities can be used to prepare optical fields with a very small mode volume. We implement an anaclastic design of a such a cavity that significantly simplifies mode matching to the fundamental cavity mode. The…
Increasing the laser power is essential to improve the sensitivity of interferometric gravitational wave detectors. However, optomechanical parametric instabilities can set a limit to that power. It is of major importance to understand and…
Open-access optical microcavities are Fabry-Perot type cavities consisting of two micrometer-size mirrors, separated by an air (or vacuum) gap typically of a few micrometers. Compared to integrated microcavities, this configuration is more…
This paper shows a novel method to precisely measure the laser power using an optomechanical system. By measuring a mirror displacement caused by the reflection of an amplitude modulated laser beam, the number of photons in the incident…
Using one arm of the Michelson interferometer and the power recycling mirror of the interferometric gravitational wave detector GEO600, we created a Fabry-Perot cavity with a length of 1200 m. The main purpose of this experiment was to…
We have realized a compact optical particle counter utilizing enhancement of light scattering within a high finesse Fabry-Perot optical cavity. In contrast to laser-based approaches such as cavity ringdown spectroscopy we use the light…
We give a simple introduction to the properties and use of ultrastable optical cavities, which are increasingly common in atomic and molecular physics laboratories for stabilizing the frequency of lasers to linewidths at the kHz level or…
The dynamics of light in Fabry-Perot cavities with varying length and input laser frequency are analyzed and the exact condition for resonance is derived. This dynamic resonance depends on the light transit time in the cavity and the…
In recent years quantum phenomena have been experimentally demonstrated on variety of optomechanical systems ranging from micro-oscillators to photonic crystals. Since single photon couplings are quite small, most experimental approaches…
We demonstrate gallium phosphide (GaP) microdisk optical cavities with intrinsic quality factors $ > 2.8\times10^{5}$ and mode volumes $< 10 (\lambda/n)^3$, and study their nonlinear and optomechanical properties. For optical intensities up…
We report the experimental observation of the photothermal effect. The measurements are performed by modulating the laser power absorbed by the mirrors of two high-finesse Fabry-Perot cavities. The results are very well described by a…
A new generation of gravitational wave detectors is currently being designed with the likely use of a different laser wavelength compared to current instruments. The estimation of the optical losses for this new wavelength is particularly…
Optical Fabry-Perot cavities are crucial tools for metrology experiments, where they achieve extreme length stability, and for some atomic physics experiments, where tunability to atomic transitions enables atom-light interactions. However,…
The characterisation of loss in optical waveguides is essential in understanding the performance of these devices and their limitations. Whilst interferometric-based methods generally provide the best results for low-loss waveguides, they…
High finesse Fabry-Perot(FP) cavity is a very important frequency reference for laser stabiliza- tion, and is widely used for applications such as precision measurement, laser cooling of ions or molecules. But the non-linear response of the…
A commercial Fabry-Perot laser diode is characterized by highly disproportionate dimensions, which poses a significant numerical challenge, even for state-of-the-art tools. This challenge is exacerbated when one of the cavity mirrors is…
We investigated the opto-mechanical properties of a Fabry-Perot cavity with a mirror mounted on a spring. Such a structure allows the cavity length to change elastically under the effect of light induced forces. This opto-mechanical…
Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical…