Related papers: Multidimensional optomechanical cantilevers for hi…
Levitated optomechanics is showing potential for precise force measurements. Here, we report a case study, to show experimentally the capacity of such a force sensor. Using an electric field as a tool to detect a Coulomb force applied onto…
Opto-mechano-fluidic resonators (OMFRs) are a new platform for high-throughput sensing of the mechanical properties of freely flowing microparticles in arbitrary media. Experimental extraction of OMFR mode shapes, especially the acoustic…
We present a method of broadening the dynamic range of optical interferometric detection of cantilever displacement. The key idea of this system is to use a wavelength-tunable laser source. The wavelength is subject to proportional-integral…
Atomic Force Microscopy has enabled 2D imaging at the sub-molecular level, and 3D mapping of the potential field. However, fast identification of the surface still remains a challenging topic. In this paper, as a step towards implementation…
Magnetic Resonance Force Microscopy (MRFM) enables three-dimensional imaging of nuclear spin densities in nanoscale objects. Based on numerical simulations, we evaluate the performance of strained SiN resonators as force sensors and show…
Since the advent of atomic force microscopy, mechanical resonators have been used to study a wide variety of phenomena, such as the dynamics of individual electron spins, persistent currents in normal metal rings, and the Casimir force. Key…
Micro-/nanomechanical mass sensors are capable to quantitatively determine molecule mass from only first three (two) measured cantilever (bridge) resonant frequencies. However, in liquid solutions that are relevant to most of the biological…
We investigate the coupling of a nanomechanical oscillator in the quantum regime with molecular (electric) dipoles. We find theoretically that the cantilever can produce single-mode squeezing of the center-of-mass motion of an isolated…
The monitoring of accelerations is essential for a variety of applications ranging from inertial navigation to consumer electronics. The basic operation principle of an accelerometer is to measure the displacement of a flexibly mounted test…
Cooling down nanomechanical force probes is a generic strategy to enhance their sensitivities through the concomitant reduction of their thermal noise and mechanical damping rates. However, heat conduction mechanisms become less efficient…
Frequency dependent dynamic behavior in Piezoresponse Force Microscopy (PFM) implemented on a beam-deflection atomic force microscope (AFM) is analyzed using a combination of modeling and experimental measurements. The PFM signal comprises…
Since the inception of the atomic force microscope AFM, dynamic methods have been very fruitful by establishing methods to quantify dissipative and conservative forces in the nanoscale and by providing a means to apply gentle forces to the…
Attosecond science has demonstrated that electrons can be controlled on the sub-cycle time scale of an optical wave, paving the way toward optical frequency electronics. Using controlled few-cycle optical waveforms, the study of sub-cycle…
Optomechanical crystals are a promising device platform for quantum transduction and sensing. Precise targeting of the optical and acoustic resonance frequencies of these devices is crucial for future advances on these fronts. However,…
We present an optomechanical method for locally measuring the rheological properties of complex fluids in the ultra-high frequency range (UHF). A mechanical disk of microscale volume is used as a small-amplitude oscillating probe that…
The atomic force microscope is a versatile tool that allows many routes to be used for investigating the mechanical properties of soft materials on the nanometer scale. In the present work, experiments were performed on polystyrene polymer…
The small mass and high coherence of nanomechanical resonators render them the ultimate force probe, with applications ranging from biosensing and magnetic resonance force microscopy, to quantum optomechanics. A notorious challenge in these…
We use the principles of cavity optomechanics to design a resonant mechanical force sensor for atomic force microscopy. The sensor is based on a type of electromechanical coupling, dual to traditional capacitive coupling, whereby the motion…
In recent years microfabricated microwave cavities have been extremely successful in a wide variety of detector applications. In this article we focus this technology on the challenge of quantum-limited displacement detection of a…
We report a new spin manipulation protocol for periodically reversing the sample magnetization for Magnetic Resonance Force Microscopy. The protocol modulates the microwave excitation frequency synchronously with the position of the…