Related papers: Airtight metallic sealing at room temperature unde…
Metallic seals are crucial machine elements in many important applications, e.g., in ultrahigh vacuum systems. Due to the high elastic modulus of metals, and the surface roughness which exists on all solid surfaces, if no plastic…
The "metallic" temperature variation of the electrical resistivity of chemical nano gold-silver coatings with a silver content of 6.6 % at. up to 13.1 % at. determined in the temperature range 4.2-300 K. Features of low-temperature…
The electrical resistance of detonation nano-diamond powders was measured from liquid nitrogen temperature to room temperature and in relative humidity environments from around 10% to 100%. After sample exposures of several hours at 100%…
We present mechanical measurements performed at low temperatures on cantilever-based microelectro-mechanicalstructures(MEMS) coated with a metallic layer. Two very different coatings are presented in order to illustrate the capabilities of…
Despite several decades of development, microfluidics lacks a sealing material that can be readily fabricated, leak-tight under high liquid water pressure, stable over a long time, and vacuum compatible. In this paper, we report the…
Silver (Ag) mirrors for astronomical telescopes consist of multiple metallic and dielectric thin films. Furthermore, the topmost surface of such Ag mirrors needs to be covered by a protection coating. While the protection coating is often…
MAX phases have great potential under demands of both high-temperature and high-stress performance, with their mixed atomic bonding producing the temperature and oxidation resistance of ceramics with the mechanical resilience of metals.…
Molecular hydrogen was pressurized in a diamond anvil cell at temperatures between 5 and 83 K. At a sufficiently high pressure, estimated to be between 477 to 491 GPa, hydrogen became metallic, determined by its reflectance in the near…
Seals are extremely useful devices to prevent fluid leakage. We present an effective medium theory of the leak-rate of rubber seals, which is based on a recently developed contact mechanics theory. We compare the theory with experimental…
Physically vitrifying single-element metallic glass requires ultrahigh cooling rates, which are still unachievable for most of the closest-packed metals. Here, we report a facile synthetic strategy for creating mono-atomic palladium…
We report measurements of the zero-field resistivity in dilute 2D electron system in silicon at temperatures down to 35 mK. This extends the previously explored range of temperatures by almost an order of magnitude. On the metallic side,…
We developed a metallic pressure cell made of nickel-chromium-aluminum (NiCrAl) for use with a non-destructive pulse magnet and a magnetic susceptibility measurement apparatus with a proximity detector oscillator (PDO) in pulsed magnetic…
With important application prospects, eutectic high entropy alloys have received extensive attention for their excellent strength and ductility in a large temperature range. The excellent casting characteristics of eutectic high entropy…
This paper presents the different processing steps of a new generic surface micromachining module for MEMS hermetic packaging at temperatures around 180 degrees C based on nickel plating and photoresist sacrificial layers. The advantages of…
The great practical utility has motivated extensive efforts to discover ultra-low resistance electrical conductors and superconductors in ambience. Here we report the observation of vanishingly small electrical resistance at the ambient…
Understanding nanomechanical response of materials represents a scientific challenge. Here, we have used in-situ electron microscopy to reveal drastic for the first time changes of structural behavior during deformation of 1-nm-wide metal…
Alkali metals exhibit unexpected structures and electronic behavior at high pressures. Compression of metallic sodium (Na) to 200 GPa leads to the stability of a wide-band-gap insulator with the double hexagonal hP4 structure. Post-hP4…
Magnesium (Mg) and its alloys have a great potential as structural materials due to their beneficial combination of high strength to weight ratio, high thermal conductivity and good machinability. However, few literatures about Mg coatings…
The lack of thermal stability, originating from their metastable nature, has been one of the paramount obstacles that hinder the wide range of applications of metallic glasses. We report that the stability of a metallic glass can be…
At the nanoscale, materials exhibit unique properties that differ greatly from those of the bulk state. In the case of Ag$_x$Pt$_{1-x}$ nanoalloys, we aimed to study the solid-liquid transition of nanoparticles of different sizes and…