Related papers: Beam tail effect of performance-enhanced EC-ITC RF…
To meet requirements of high performance THz-FEL (Free Electron Laser), a compact scheme of FEL injector was proposed. Thermionic cathode was chosen to emit electrons instead of photo-cathode with complex structure and high cost. The…
Free Electron Lasers driven by Super-Conducting Linacs require the generation, acceleration and transport of trains of bunches with high charge, high repetition rate and low emittance. A numerical model already developed for the modeling of…
KEK-ATF is studying the low-emittance multi-bunch electron beam for the future linear collider. In ATF, thermionic gun is used to generate 20 bunches electron beam with the bunch spacing of 2.8 ns. Due to a distortion of the gun emission…
With the aim to obtain short-pulse bunches with high peak current for a terahertz radiation source, an EC-ITC (External-Cathode Independently Tunable Cells) RF gun was employed. As the external injecting electron source of the ITC RF gun, a…
The energy recovery linac test facility (ERL-TF), a compact ERL-FEL (free electron laser) two-purpose machine, was proposed at the Institute of High Energy Physics, Beijing. As one important component of the ERL-TF, the photo-injector…
In a linac driven Free Electron Laser (FEL), the shot-to-shot and non-invasive monitoring of the electron bunch length is normally ensured by Bunch Compressor Monitors (BCMs). The bunch-length dependent signal of a BCM results from the…
We consider the collective beam dynamics at the injector section of the European XFEL. The results of the measurements for the longitudinal phase space (LPS) of the electron beam are compared with those obtained from numerical modeling. A…
The CLIC Test Facility (CTF3) is an intermediate step to demonstrate the technical feasibility of the key concepts of the new RF power source for CLIC. CTF3 will use electron beams with an energy range adjustable from 170 MeV (3.5 A) to 380…
We present the anticipated performances of a multi-cell RF injector operated either with a thermoionic cathode or with a gated photo-cathode. By means of a magnetic compression and a Coherent Spontaneous Emission seeded FEL radiating at 100…
Recirculating energy recovery linacs are a promising technology for delivering high power particle beams ($\sim$GW) while only requiring low power ($\sim$kW) RF sources. This is achieved by decelerating the used bunches and using the energy…
The electron multipacting is an important factor for the development of the electron cloud. There is a trailing-edge multipacting in the tail of the long-bunch beam. It can be described by the energy gain and motion of electrons. The…
A compact accelerator based super-radiant THz source is under development at Inter University Accelerator Centre (IUAC), New Delhi. The facility is based on the principle of pre-bunched Free Electron Laser (FEL) which will produce THz…
Realization of a short bunch beam by manipulating the longitudinal phase space distribution with a finite longitudinal dispersion following an off-crest accelera- tion is a widely used technique. The technique was applied in a compact test…
The strength of the electromagnetic fields in the bunch collision at a linear collider will have a significant effect, yielding large numbers of beamstrahlung photons and associated coherent pair production. These effects are limited in the…
For synchrotron light sources, the brightness of user X-ray beams is primarily determined by the electron beam emittance and energy spread at operational intensity. A common feature of fourth-generation synchrotrons is the short length of…
Recent experiments [1] have explored the use of a free-electron laser (FEL) as a buncher for a microwave two-beam accelerator, and the subsequent driving of a standing-wave rf output cavity. Here we present a deeper analysis of the…
After a successful scrubbing run in the beginning of 2011, the LHC can be presently operated with high intensity proton beams with 50 ns bunch spacing. However, strong electron cloud effects were observed during machine studies with the…
The buildup of low energy electrons in an accelerator, known as electron cloud, can be severely detrimental to machine performance. Under certain beam conditions, the beam can become resonant with the cloud dynamics, accelerating the…
We present a novel concept for the generation of gigahertz repetition rate high brightness electron bunches. A custom design 100 kV thermionic gun provides a continuous electron beam, with the current determined by the filament size and…
Un-gated thermionic cathode RF guns are well known as a robust source of electrons for many accelerator applications. These sources are in principle scalable to high currents without degradation of the transverse emittance due to control…