Related papers: Micro-lensed single-mode optical fiber with high n…
Tapered optical fibers (TOFs) are used in many areas of physics and optical technologies ranging from coupling light into nanophotonic components to optical sensing and amplification to interfacing quantum emitters. Here, we study the…
We show how light can be controllably transported by light at microscale dimensions. We design a miniature device which consists of a short segment of an optical fiber coupled to transversely-oriented input-output microfibers. A whispering…
A significant challenge in the development of chip-scale cavity-optomechanical devices as testbeds for quantum experiments and classical metrology lies in the coupling of light from nanoscale optical mode volumes to conventional optical…
We experimentally realize an optical fiber ring resonator that includes a tapered section with subwavelength-diameter waist. In this section, the guided light exhibits a significant evanescent field which allows for efficient interfacing…
We numerically report a one-sided cavity on an optical nanocapillary fiber (NCF) using a composite cavity. The composite cavity is formed by combining an optical NCF and an asymmetric defect mode grating. We design the cavity to realize the…
High-quality micropillar cavities were grown using molecular-beam epitaxy. Stable continuous-wave lasing at room-temperature was demonstrated for microlasers with semiconductor and hybrid output mirrors. At 300 K, single-mode lasing was…
A simple self-referenced non destructive method is proposed for measuring the cutoff wavelength of microstructured optical fibers (MOFs). It is based on the analysis of the time dependent optical power transmitted through a bow-tie slit…
With the goal of accurately extracting the optical field losses in a three-dimensional (3D), circularly coiled waveguide (e.g., bent optical fiber), this effort presents the numerical methodologies that are implemented for an envelope…
Achieving simultaneous broadband achromatic focusing and a wide field of view remains a significant challenge for metalenses. In this work, we begin with a quadratic phase profile, enabling full field-of-view designs, and apply dispersion…
We demonstrate the fabrication of an optical nanofiber tip (ONFT) using a two-step chemical etching technique. This technique employs 30% and 24% hydrofluoric (HF) acid for the first and second steps, respectively. In the first step, a…
Nearly concentric optical cavities can be used to prepare optical fields with a very small mode volume. We implement an anaclastic design of a such a cavity that significantly simplifies mode matching to the fundamental cavity mode. The…
On-chip optical trapping systems allow for high scalability and lower the barrier to access. Systems capable of trapping multiple particles typically come with high cost and complexity. Here we present a technique for making parabolic…
The microlens is a key enabling technology in optoelectronics, permitting light to be efficiently coupled to and from devices such as image sensors and light-emitting diodes. Their ubiquitous nature motivates the development of new…
To manipulate cold atoms in spatially constrained quantum engineering platforms, we developed a lensless optical system with a $\sim$1 $\mu$m resolution and a transverse size of only 225 $\mu$m. We use a multimode optical fiber with a high…
We consider the problem of radiation into free space from the end-facet of a single-mode photonic crystal fiber (PCF). We calculate the numerical aperture NA=sin theta from the half-divergence angle theta ~ tan^{-1}(lambda/pi w) with pi w^2…
We introduce a system capable of focusing light through a multimode fiber in 37ms, one order of magnitude faster than demonstrated in previous reports. As a result, the focus spot can be maintained during significant bending of the fiber,…
We describe a novel method for making microbottle-shaped lasers by using a CO$_2$ laser to melt Er:Yb glass onto silica microcapillaries or fibres. This is realised by the fact that the two glasses have different melting points. The CO$_2$…
Surfaces covered with layers of ultrathin nanoantenna structures, so-called metasurfaces, have recently been proven capable of completely controlling phase of light. Metalenses have emerged from the advance in the development of…
Optical spectroscopy is a fundamental tool in numerous areas of science and technology. Much effort has focused on miniaturizing spectrometers, but thus far at the cost of high spectral resolution and broad operating range. Here, we…
Full-vectorial finite difference method with perfectly matched layers boundaries is used to identify the single mode operation region of submicron rib waveguides fabricated using sili-con-on-insulator material system. Achieving high mode…