Related papers: Protective Performance of Water-Based Epoxy Coatin…
Weakly bound, physisorbed hydrocarbons could in principle provide a similar water-repellency as obtained by chemisorption of strongly bound hydrophobic molecules at surfaces. Here we present experiments and computer simulations on the…
In this work, tin oxide (SnO2)/multi-walled carbon nanotube (MWCNT) composite based ethanol sensor that exhibits fast response/recovery behaviour, large sensitivity, and good selectivity was demonstrated. First, Pd doped SnO2 (SnO2-Pd)…
Pd-based anodes for alcohol oxidation suffer from surface poisoning and sluggish kinetics. Here, we developed Pd-Nb2O5/C nanocomposites to improve ethanol electrooxidation kinetics and CO tolerance in alkaline media. Orthorhombic Nb2O5…
Pulsed laser-deposited amorphous carbon nanofoams are potential candidate for electrochemical energy storage applications due to ultra-light weight, large volumetric void fractions, and co-existence of sp, sp2 and sp3 carbon hybridization.…
Modification of surfaces to enable dropwise condensation is a promising approach for achieving high condensation rates. In this work, we present an experimental study on condensation of water on copper surfaces coated with an ultrathin, 5…
Developing scalable and environmentally benign anticorrosion coatings is critical for protecting steel infrastructure in chloride-rich environments. Here, a nacre-inspired multilayer epoxy coating reinforced with four MXene systems is…
Condensation of water on metallic surfaces is critical for multiple energy conversion processes. Enhancement in condensation heat transfer efficiency often requires surface texturing and hydrophobicity, usually achieved through coatings, to…
Nanocomposites reinforced with hybrid fillers of multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were developed, aimed at improving electrical and morphological properties of the hybrid nanocomposites while reducing…
The work presents a comprehensive methodology to determine the Shielding Effectiveness (SE) of single-walled carbon nanotubes (SWCNTs)/polymer nanocomposites. Here, an algorithm based on Ant Colony Optimization (ACO) was employed to…
Monitoring structural integrity during and after extreme events such as an earthquake or a tsunami is a mundane yet important task that still awaits a workable solution. Currently available stress sensors are not sufficiently robust and are…
In this paper, we present indirect methods to define the change in the rates of hydrolysis and condensation reactions of a silica oxide network formed of (3-glycidoxypropyl)methyltriethoxysilane (GPTMS) and (3-aminopropyl)triethoxysilane…
We theoretically investigated the electronic, electrochemical and magnetic properties of Sb doped $Na_xCoO_2$ ($x = 1, 0.75$ and $0.50$). $Sb_{Co}$ dopants adopt +5 oxidation state in $Na_xCoO_2$ host lattice for all Na concentrations…
The paper reports on the comparison of the wetting properties of super-hydrophobic silicon nanowires (NWs), using drop impact impalement and electrowetting (EW) experiments. A correlation between the resistance to impalement on both EW and…
MnxOy coated over TiO2 nanotube array substrate was doped with Mo and polyaniline (PANI) and applied for electrochemical desulfurization of concentrated sulfide (HS) solutions at basic pH, typical of biogas scrubbing solutions and…
The measured capacitance, modulus and strength of carbon nanotube-polyaniline (CNT-PANI) composite electrodes render them promising candidates for structural energy storage devices. Here, CNT-PANI composite electrodes are manufactured with…
Hypothesis: Slippery Omniphobic Covalently Attached Liquids (SOCAL) have been proposed for making omnirepellent thin films of self-assembled dimethylsiloxane polymer brushes grafted from silica surfaces. Smooth and flat at very small scale,…
Diamond and diamond-like carbon (DLC) are used as coating materials for numerous applications, ranging from biomedicine to tribology. Recently, it has been shown that the hydrophilicity of the carbon films can be enhanced by silicon doping,…
In this study for the first time, polymeric nanofiltration membranes based on polyethersulfone (PES) polymer were surface-modified by using a diamond-like carbon (DLC) nanostructure coating layer. The effect of this coating on the…
We show that a multi-walled carbon nanotube film can be used as the sensing element of a low-cost sensor for the alcoholic concentration in liquid solutions. To this purpose, we investigate the electrical resistance of the film as a…
Despite attractive cost-effectiveness, scalability, and superior stability, carbon-based printable perovskite solar cells (CPSCs) still face moisture-induced degradation that limits their lifespan and commercial potential. Here, we…