Related papers: Ultralow noise up-conversion detector and spectrom…
The realization of a semiconductor near-unity absorber in the infrared will provide new capabilities to transform applications in sensing, health, imaging, and quantum information science, especially where portability is required.…
We report on a gated single-photon detector based on InGaAs/InP avalanche photodiodes (APDs) with a single-photon detection efficiency exceeding 55% at 1550 nm. Our detector is gated at 1 GHz and employs the self-differencing technique for…
Superconducting single photon detectors (SSPD) based on nanopatterned niobium nitride wires offer single photon counting at fast rates, low jitter, and low dark counts, from visible wavelengths well into the infrared. We demonstrate the…
It is challenging to implement genuine free running single photon detectors for the 1550 nm wavelength range with simultaneously high detection efficiency (DE), low dark noise, and good time resolution. We report a novel read out system for…
We report a compact, scalable, and high-performance superconducting nanowire single-photon detector (SNSPD) array by using a multichannel optical fiber array-coupled configuration. For single pixels with an active area of 18 um in diameter…
For the SPECTRAP experiment at GSI, Germany, detectors with Single-Photon counting capability in the visible and near-infrared regime are required. For the wavelength region up to 1100 nm we investigate the performance of 2x2 mm^2 avalanche…
We report a procedure to detect mid-infrared single photons at 4.65 um via a two-stage scheme based on Sum Frequency Generation, using a Periodically Poled Lithium Niobate (PPLN) nonlinear crystal and a Silicon Avalanche Photodiode. An…
We combine parametric frequency upconversion with single-photon counting technology to achieve detection sensitivity down to the terahertz (THz) single-photon level. Our relatively simple detection scheme employs a near-infrared ultrafast…
Semiconductor quantum dots embedded in hybrid circular Bragg gratings are a promising platform for the efficient generation of nonclassical light. The scalable fabrication of multiple devices with similar performance is highly desirable for…
High-frequency sine wave gating (SWG) InGaAs/InP single-photon detectors (SPDs) are widely used for synchronous near-infrared single-photon detection. For practical use, the size of SPD is one of the most concerning features for system…
III-V semiconductor mid-infrared photodetectors based on intersubband transitions hold a great potential for ultra-high-speed operation up to several hundreds of GHz. In this work we exploit a ~350nm-thick GaAs/Al0.2Ga0.8As…
High-frequency gating InGaAs/InP single-photon detectors (SPDs) are widely used for applications requiring single-photon detection in the near-infrared region such as quantum key distribution. Reducing SPD size is highly desired for…
Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR)…
Ultra-sensitive short-wave infrared (SWIR) photon detection is a crucial aspect of ongoing research in quantum technology. However, developing such detectors on a CMOS-compatible silicon technological platform has been challenging due to…
We report on high-efficiency superconducting nanowire single-photon detectors based on amorphous WSi and optimized at 1064 nm. At an operating temperature of 1.8 K, we demonstrated a 93% system detection efficiency at this wavelength with a…
We have designed, constructed, and tested an InGaAs near-infrared camera to explore whether low-cost detectors can make small (<1 m) telescopes capable of precise (<1 mmag) infrared photometry of relatively bright targets. The camera is…
Sensitive mid-infrared (MIR) spectroscopy plays an indispensable role in various photon-starved conditions. However, the detection sensitivity of conventional MIR spectrometers is severely limited by excessive noises of the involved…
We fabricated and characterised nanowire superconducting single-photon detectors (SSPDs) made of 4 nm thick amorphous Mo$_x$Si$_{1-x}$ films. At 1.7 K the best devices exhibit a detection efficiency up to 18% at 1.2 um wavelength of…
At the core of an ideal single photon detector is an active material that ideally absorbs and converts photons to discriminable electronic signals. A large active material volume favours high-efficiency absorption, but often at the expense…
Sensitive mid-infrared (MIR) detection is highly demanded in various applications, ranging from remote sensing, infrared surveillance, environmental monitoring to industrial inspection. Among others, upconversion infrared detectors have…