Related papers: Drag reduction by a solid wall emulating spanwise …
Wall-roughness induces extra drag in wall-bounded turbulent flows. Mapping any given roughness geometry to its fluid dynamic behaviour has been hampered by the lack of accurate and direct measurements of skin-friction drag. Here the…
Wall-pressure fluctuations are a practically robust input for real-time control systems aimed at modifying wall-bounded turbulence. The scaling behaviour of the wall-pressure--velocity coupling requires investigation to properly design a…
Opposition-control of the energetic cycle of near wall streaks in wall-bounded turbulence, using numerical approaches, has shown promise for drag reduction. For practical implementation, opposition control is only realizable if there is a…
Roughness predominantly alters the near-wall region of turbulent flow while the outer layer remains similar. This makes it a prime candidate for the minimal-span channel, which only captures the near-wall flow by restricting the spanwise…
Direct numerical simulations of spanwise-rotating turbulent channel flow with a parabolic bump on the bottom wall are employed to investigate the effects of rotation on flow separation. Four rotation rates of $Ro_b := 2\Omega H/U_b = \pm…
The modeling of surface pressure wave number spectra beneath a turbulent boundary layer is reviewed and reconsidered in terms of the vorticity in the flow. Using a solution based on the vorticity equation and Squires theorem, which was…
A new wall-wake law is proposed for the streamwise turbulence in the outer region of a turbulent boundary layer. The formulation pairs the logarithmic part of the profile (with a slope A_1 and additive constant B_1) to an outer linear part,…
The variance and spectra of wall-normal velocities are investigated for direct numerical simulations of turbulent flow in a channel, pipe, and zero-pressure-gradient boundary layer across a decade of friction Reynolds numbers. Spectra along…
We investigate experimentally the influence of the liquid viscosity on the problem of the generation of waves by a turbulent wind at the surface of a liquid, extending the results of Paquier, Moisy and Rabaud [Phys. Fluids {\bf 27}, 122103…
Turbulent flow over a surface with streamwise-elongated rough and smooth stripes is studied by means of direct numerical simulation (DNS) in a periodic plane open channel with fully resolved roughness. The goal is to understand how the mean…
Large eddy simulations (LES) are employed to investigate the role of time-varying currents on the form drag and vortex dynamics of submerged 3D topography in a stratified rotating environment. The current is of the form $U_c+U_t \sin(2\pi…
Direct numerical simulations are used to investigate the individual dynamics of large spherical particles suspended in a developed homogeneous turbulent flow. A definition of the direction of the particle motion relative to the surrounding…
An addition of polymers can significantly reduce drag in wall-bounded turbulent flows, such as pipes or channels. This phenomenon is accompanied by a noticeable modification of the mean velocity profile. Starting from the premise that…
Direct numerical simulations (DNSs) of turbulent pipe flow subjected to streamwise-varying wall rotation are performed. This control method is able to achieve drag reduction and even relaminarize the flow under certain control parameters at…
The viscous drag on a slender rod by a wall is important to many biological and industrial systems. This drag critically depends on the separation between the rod and the wall and can be approximated asymptotically in specific regimes,…
In this article, the mechanics of drag reduction on an axisymmetric body of revolution by shallow dimples is presented by using the high-fidelity Reynolds Stress Modeling based simulations. Experimental results of drag evolution from…
Many engineering and environmental surfaces exhibit spatial heterogeneity in the spanwise direction and encompass multiple surface length scales. When the dominant spanwise length scale is on the order of the largest flow scales (e.g., the…
Direct Numerical Simulations are used to solve turbulent flow and heat transfer over a variety of rough walls in a channel. The wall geometries are exactly resolved in the simulations. The aim is to understand the effect of roughness…
Flow control is of interest in many open and wall-bounded shear flows in order to reduce drag or to avoid sudden large fluctuations that may lead to material failure. An established means of control is the application of suction through a…
Estimation of near-wall turbulence in channel flow from outer observations is investigated using adjoint-variational data assimilation. We first consider fully resolved velocity data, starting at a distance from the wall. By enforcing the…