Related papers: Eliminating cracking during drying
The drying of a colloidal dispersion can result in a gel phase defined as a porous matrix saturated in solvent. During the drying process, high mechanical stresses are generated. When these stresses exceed the strength of the material, they…
Drying of colloidal droplets on solid, rigid substrates is associated with a capillary pressure developing within the droplet. In due course of time, the capillary pressure builds up due to droplet evaporation resulting in the formation of…
We investigate the initiation of cracks in vertically freestanding water-saturated colloidal pillars constructed using a direct-write technique. Paradoxically, the cracks form during drying at the free end, far from the substrate, where the…
Drying of colloidal dispersion and their consolidation into a particulate deposit is a common phenomenon. This process involves various physical processes such as diffusion of liquid molecules into the ambient atmosphere and advection of…
Cracking of suspensions during drying is a common problem. While additives, e.g. binders and surfactants, can mitigate this problem, some applications, such as printing conductive pastes or sintering green bodies, do not lend themselves to…
We investigate the 3D structure and drying dynamics of complex mixtures of emulsion droplets and colloidal particles, using confocal microscopy. Air invades and rapidly collapses large emulsion droplets, forcing their contents into the…
Hypothesis: Lateral accumulation and film defects during drying of hard particle coatings is a common problem, typically solved using polymeric additives and surface active ingredients, which require further processing of the dried film.…
-- A scientific hurdle in manufacturing solid films by drying colloidal layers is preventing them from fracturing. This paper examines how the drying rate of colloidal liquids influences the particle packing at the nanoscale in correlation…
Drying a droplet of colloidal dispersion can result in complex pattern formation due to both development and deformation of a skin at the drop surface. The present study focus on the drying process of droplets of colloidal dispersions in a…
Consolidation of colloidal gels results in enormous stresses that are usually released in the formation of undesirable cracks. The capacity of a gel network to crack during drying depends on the existence and significance of a pressure…
Substrate wettability alteration induced control over crack formation process in thin colloidal films has been addressed in the present study. Colloidal nanosuspension (53nm, mean particle diameter) droplets have been subjected to natural…
Clay, the major ingredient of natural soils, is often used as a rheological modifier while formulating paints and coatings. When subjected to desiccation, colloidal clay suspensions and clayey soils crack due to the accumulation of…
Drying complex fluids is a common phenomenon where a liquid phase transforms into a dense or porous solid. This transformation involves several physical processes, such as the diffusion of liquid molecules into the surrounding atmosphere…
The removal of liquid droplets from solid surfaces is central to cleaning, coatings and oil recovery. Here we investigate liquid droplets capillary lifted by an immiscible working liquid. The rising working liquid triggers the formation of…
Charged colloidal dispersions make up the basis of a broad range of industrial and commercial products, from paints to coatings and additives in cosmetics. During drying, an initially liquid dispersion of such particles is slowly…
When a colloidal gel dries through evaporation, cracks are usually formed, which often reveal underlying processes at work during desiccation. Desiccating colloid droplets of few hundred $\mu l$ size show interesting effects of pattern…
We report an experimental study of the crack pattern formed during the drying of a colloidal suspension. A horizontal fiber, which provides a one dimensional, boundary-free substrate, is coated by a film of micronic thickness. The geometry…
Drying suspensions often leave behind complex patterns of particulates, as might be seen in the coffee stains on a table. Here we consider the dynamics of periodic band or uniform solid film formation on a vertical plate suspended partially…
In this paper, we present a mathematical model and numerical simulation of the evaporation and drying process of a liquid droplet containing suspended solids. This type of drying is commonly encountered in manufacturing processes such as…
The destabilization of emulsions is important for many applications but remains incompletely understood. We perform squeeze flow measurements on oil-in-water emulsions, finding that the spontaneous destabilization of emulsions is generally…