Related papers: Description of a Differential Setup for Relaxation…
High-granularity calorimeters utilizing silicon pad sensors as main active material are being designed for the CMS endcap calorimeter upgrade and have been proposed for the electromagnetic calorimeters at CLIC, ILC and FCC-ee. The silicon…
Specific heat measurements were used to study the magnetic phase transition in Ga1-xMnxAs. Two different types of Ga1-xMnxAs samples have been investigated. The sample with a Mn concentration of 1.6% shows insulating behavior, and the…
The main purpose of this work was to design, develop and construct a simple, low-cost AC susceptometer to measure large, bulk superconducting samples (up to 32 mm in diameter) in the temperature range 78-120 K. The design incorporates a…
We describe how we can precisely measure variations in the entropy S of small solid samples below room temperature, as a function the temperature T or the external magnetic field H, respectively. A simple differential-thermal analysis (DTA)…
We report on the development of a sensitive dilatometer based upon a AFM piezocantilever. This dilatometer has been tested at temperatures down to 25 mK and in magnetic fields up to 16 T. The layered heavy fermion superconductor $CeCoIn_5$…
Heat capacity measurements using the ac steady state method are often considered difficult to provide absolute accuracy. By adjusting the working frequency to maintain a constant phase and using the phase information to obtain the heat…
Magnetocaloric effect in Mn4FeGe3-xSix compounds has been studied by dc magnetization measurements. For the parent compound Mn4FeGe3, the paramagnetic to ferromagnetic transition temperature TC is above room temperature (320 K), which…
We present a specific heat measurement technique adapted to thin or very thin suspended membranes from low temperature (8 K) to 300 K. The presented device allows the measurement of the heat capacity of a 70 ng silicon nitride membrane (50…
The design and operation of apparatus for measurements of in-beam hyperfine interactions and nuclear excited-state $g$ factors is described. This apparatus enables a magnetic field of about 0.1 tesla to be applied to the target and the…
Estimation of thermal contact resistances between cylinders can be achieved using heating on the cross sections by a laser spot and measurement of the temperature response by IR thermography. This type of measurement makes it possible to…
The entropy of a system gives a powerful insight into its microscopic degrees of freedom, however standard experimental ways of measuring entropy through heat capacity are hard to apply in mesoscale and nanoscale systems, as they require…
At the ultra-thin limit below 20 nm, a film's electrical conductivity, thermal conductivity, or thermoelectricity depends heavily on its thickness. In most studies, each sample is fabricated one at a time, potentially leading to…
We demonstrate the quantitative measurement of the magnetization of individual magnetic nanoparticles (MNP) using a magnetic force microscope (MFM). The quantitative measurement is realized by calibration of the MFM signal using an MNP…
Using a recently developed scaling procedure that allows to establish the temperature dependence of the normalized upper critical field from measurements of the equilibrium isothermal magnetization, we analyze experimental data obtained on…
In a multi-terminal setup, when time-reversal symmetry is broken by a magnetic field, the heat flows can be managed by designing a device with programmable Boolean behavior. We show that such device can be used to implement operations like…
A simple and low cost apparatus has been designed and built to measure the electrical resistivity, ($\rho$), of metal and semiconductors in 300-620 K temperature range. The present design is suitable to do measurement on rectangular bar…
We report a new design of temperature-modulated dilatometer, which obtains the linear thermal expansion coefficient by measuring the oscillating changes of the sample's length and temperature by a piezobender and a thermocouple,…
We study the mechanical fluctuations of a micrometer sized silicon cantilever subjected to a strong heat flow, thus having a highly non-uniform local temperature. In this non-equilibrium steady state, we show that fluctuations are…
This paper presents a novel method to estimate the power consumption of distinct active components on an electronic carrier board by using thermal imaging. The components and the board can be made of heterogeneous material such as plastic,…
Measurements of the heat capacity C(T,H) of the one-dimensional quantum magnet TiOCl are presented for temperatures 2K < T < 300K and magnetic fields up to 5T. Distinct anomalies at 91K and 67K signal two subsequent phase transitions. The…