Related papers: Subtraction of temperature induced phase noise in …
LISA Pathfinder (LPF) was a technology pioneering mission designed to test key technologies required for gravitational wave detection in space. In the low frequency regime (milli-Hertz and below), where space-based gravitational wave…
Low-noise temperature measurements at frequencies in the milli-Hertz range are needed in the LISA and LISA PathFinder (LPF). The required temperature stability for LISA is around 10 uK/sqrt(Hz) at frequencies down to 0.1 mHz. In this paper…
During the On-Station Thermal Test campaign of the LISA Pathfinder the data and diagnostics subsystem was tested in nearly space conditions for the first time after integration in the satellite. The results showed the compliance of the…
High-resolution temperature measurements are required in the LTP, i.e., 10 uK/sqrt(Hz) from 1 mHz to 30 mHz. This has been already accomplished with thermistors and a suitable low noise electronics. However, the frequency range of interest…
In a space based gravitational wave antenna like LISA, involving long light paths linking distant emitter/receiver spacecrafts, signal detection amounts to measuring the light-distance variationsthrough a phase change at the receiver. This…
The Laser Interferometer Space Antenna (LISA) will be the first space-based gravitational wave (GW) observatory. It will measure gravitational wave signals in the frequency regime from 0.1 mHz to 1 Hz. The success of these measurements will…
Noise measurements have been carried out in the LISA bandwidth (0.1 mHz to 100 mHz) to characterize an all-optical atomic magnetometer based on nonlinear magneto-optical rotation. This was done in order to assess if the technology can be…
Silicon quantum dot qubits show great promise but suffer from charge noise with a 1/f^\alpha spectrum, where f is frequency and \alpha \lesssim 1. It has recently been proposed that 1/f^\alpha noise spectra can emerge from a few thermally…
Fluctuations in the local Newtonian gravitational field present a limit to high precision measurements, including searches for gravitational waves using laser interferometers. In this work, we present a model of this perturbing…
The thermal fluctuation of mirror surfaces is the fundamental limitation for interferometric gravitational wave (GW) detectors. Here, we experimentally demonstrate for the first time a reduction in a mirror's thermal fluctuation in a GW…
This paper discusses force noise in LISA and LISA Pathfinder arising from the interaction of patch potentials on the test mass and surrounding electrode housing surfaces with their own temporal fluctuations. We aim to estimate the…
It is expected that interferometric gravitational wave detectors such as LIGO \cite{Barish99} will be eventually limited by fundamental noise sources like shot noise and Brownian motion, as well as by seismic noise. In the commissioning…
The LISA mission will be the first observatory to detect gravitational waves from space within the millihertz frequency band. Magnetic forces have an important impact on the instrument's sensitivity below the millihertz. Hence, monitoring…
The space-based gravitational wave detector LISA will observe in the low-frequency gravitational-wave band (0.1 mHz up to 1 Hz). LISA will search for a variety of expected signals, and when it detects a signal it will have to determine a…
Advanced gravitational-wave detector designs are pushing towards lower frequencies, where certain types of noise, previously considered negligible, may come to dominate the detectors' noise budgets. In particular, we revisit atmospheric…
We present the calculation of thermal noise in interferometric gravitational-wave detectors due to the thermal fluctuations of the beam splitter (BS). This work makes use of a recently developed method of the analysis of thermal noise in…
We estimate the upper frequency cutoff of the galactic white dwarf binaries gravitational wave background that will be observable by the LISA detector. This is done by including the modulation of the gravitational wave signal due the motion…
Tiny vibrations of mechanical structures are the main limiting cause in a number of high sensitivity measurement apparatus, chief among them the most sensitive displacement apparatus on earth: gravitational wave interferometers. Such…
The Laser Interferometer Space Antenna (LISA) will explore the source-rich milli-Hertz band of the gravitational wave spectrum. In contrast to ground based detectors, where typical signals are short-lived and discrete, LISA signals are…
The suspension noise in interferometric gravitational wave detectors is caused by losses at the top and the bottom attachments of each suspension fiber. We use the Fluctuation-Dissipation theorem to argue that by careful positioning of the…