Related papers: Multimode optical fiber based spectrometers
Correlation OTDR with a bit rate of 10 Gbit/s is used to measure fiber latency with an accuracy of a few picoseconds. The concept is demonstrated measuring the chromatic dispersion of a 2.2-km fiber section.
The detection of the state of polarization (SOP) of light is essential for many optical applications. However, it is a challenge for cost-effective SOP measurement due to the complexity of conventional methods and poor transferability of…
Accurate monitoring of temperature, axial strain, and refractive index is critical for structural health monitoring, industrial process control, and environmental sensing. However, conventional optical fiber sensors are often limited by…
Extracting meaningful information about unknown quantum states without performing a full tomography is an important task. Low-dimensional projections and random measurements can provide such insight but typically require careful crafting.…
Multimode fibers (MMFs) offer a cost-effective connection solution for small and medium length networks. However, data rates through multimode fibers are traditionally limited by modal dispersion. Signal processing and Multiple-Input…
Transmission matrix measurements of multimode fibers are now routinely performed in numerous labs, enabling control of the electric field at the distal end of the fiber and paving the way for the potential application to ultrathin medical…
Laser speckle, the granular intensity pattern arising from random optical interference, provides a high-dimensional encoding of spectral information that can be exploited for precision metrology. Speckle-based spectrometers have advanced…
We describe an all-fiber nonlinear interferometer based on four-wave mixing in highly nonlinear fiber. Our configuration realizes phase-sensitive interference with 97% peak visibility and >90% visibility over a broad 554 GHz optical band.…
Multi-mode fibers (MMFs) and single-mode fibers (SMFs) are widely used in optical communication networks. MMFs are the practical choice in terms of cost in applications that require short distances. Beyond that, SMFs are necessary because…
Classical single-mode fiber interferometers, using one fiber per aperture, have very limited imaging capabilities and small field of view. Observations of extended sources (resolved by one aperture) cannot be fully corrected for wavefront…
The use of optical fiber as sensor as well as transmission medium for sensing data is discussed, enabling the use of optically active sensors without power supply at distances of tens of kilometers. Depending on the interrogation system, a…
We present a fiber-ring resonator that realizes an ultra-narrowband, high-extinction, low-loss, tunable optical filter. It consists of a pair of commercial variable ratio directional couplers that allow precise adjustment of the filter…
The optical fiber used as a microwave delay line exhibits high stability and low noise and makes accessible a long delay (>100 microseconds) in a wide bandwidth (about 40 GHz, limited by the optronic components). Hence, it finds…
Speckle-based sensing exploits the rich environmental information of its high-dimensional spatial intensity patterns. However, the requirement for camera-based acquisition and subsequent electronic digitization introduces significant…
An ultrafast single-pixel optical 2D imaging system using a single multimode fiber (MF) is proposed. The MF acted as the all-optical random pattern generator. Light with different wavelengths pass through a single MF will generator…
The measurement of the wavelength of light using speckle is a promising tool for the realization of compact and precise wavemeters and spectrometers. However, the resolution of these devices is limited by strong correlations between the…
Optical fiber technologies enable high-speed communication, medical imaging, and advanced sensing. Among the techniques for the characterization of optical fibers, Xray computed tomography has recently emerged as a versatile non-destructive…
We show that the output mode of a single-mode optical fiber can be directly focused to a sub-wavelength waist with a finite working distance by tapering the fiber to a diameter of the order of the wavelength and terminating it with a…
We introduce a system capable of focusing light through a multimode fiber in 37ms, one order of magnitude faster than demonstrated in previous reports. As a result, the focus spot can be maintained during significant bending of the fiber,…
We demonstrate a new approach to classical fiber-fed spectroscopy. Our method is to use a photonic lantern that converts an arbitrary (e.g. incoherent) input beam into N diffraction-limited outputs. For the highest throughput, the number of…