Related papers: High coercivity induced by mechanical milling in c…
We prepared very high-coercivity cobalt ferrite nanoparticles using short-time high-energy mechanical milling. After the milling process, the coercivity of the nanoparticles reached 3.75 kOe - a value almost five times higher than that…
Magnetic nanoparticles of cobalt ferrite have been synthesized by wet chemical method using stable ferric and cobalt salts with oleic acid as the surfactant. X-ray Diffraction (XRD) and Transmission Electron Microscope (TEM) confirmed the…
We report an experimental study of the CoFe2O4/CoFe2 nanocomposite, a nanostructured material formed by hard (CoFe2O4) and soft (CoFe2) magnetic materials. The precursor material, cobalt ferrite (CoFe2O4), was prepared using the…
Cobalt ferrite nanoparticles have been synthesized using a co-precipitation approach. Co:Fe precursor ratio is varied over a certain window (1.05 to 1.2). It is observed that the 1.15:2 precursor ratio gives better phase control but poor…
We synthesized pure and Co-doped (6.25 12.5 at.) ZrO$_2$ nanopowders in order to study their magnetic properties.We analyzed magnetic behavior as a function of the amount of Co and the oxygenation, which was controlled by low pressure…
We report an experimental study of the bimagnetic nanocomposites CoFe2/CoFe2O4.The precursor material, CoFe2O4 was prepared using the conventional stoichiometric combustion method. The nanocomposite CoFe2/CoFe2O4 was obtained by total…
In this work, a successful synthesis of magnetic cobalt ferrite (CoFe2O4) nanoparticles is presented. The synthesized CoFe2O4 nanoparticles have a spherical shape and highly monodisperse in the selected solvent. The effect of different…
Cobalt ferrite (CoFe$_2$O$_4$) is a prototypical ferrimagnetic spinel oxide whose exceptional magnetic anisotropy, magnetoelastic coupling, and thermal stability underpin applications in spintronics, magnetic hyperthermia, energy…
We report the magnetic properties of mechanically milled Co$_{0.2}$Zn$_{0.8}$Fe$_2$O$_4$ spinel oxide. After 24 hours milling of the bulk sample, the XRD spectra show nanostructure with average particle size $\approx$ 20 nm. The as milled…
CoFe2O4 nanoparticles were synthesized using gelatin as a polymerizing agent. Structural, morphological and magnetic properties of samples treated at different temperatures were investigated by X-ray diffraction, scanning electron…
The observation of giant coercivity exceeding 20 kOe at low temperatures in several transition-metal-based compounds has attracted significant attention from a fundamental perspective. This research is also relevant to developing…
Cobalt carbide nanoparticles were processed using polyol reduction chemistry that offers high product yields in a cost effective single-step process. Particles are shown to be acicular in morphology and typically assembled as clusters with…
Fe/Co bilayers were made using ion beam sputtering and then were subjected to nitrogen-ion irradiation to explore the influence of irradiation on their magnetic properties. Magnetization studies of Fe/Co bilayers along with their irradiated…
Single-phase Mg-doped ZnFe$_2$O$_4$ nanoparticles with x= 0, 0.3, 0.5, 0.7 have been prepared by the glycol-thermal method without any subsequent calcination. The crystallite size, microstructure and magnetic properties of the prepared…
The theoretical analysis of the effect of uniaxial stress on the magnetization of the system of noninteracting nanoparticles is done by an example of heterophase particles of maghemite, epitaxially coated with cobalt ferrite. It is shown…
Magnetic nanomaterials (23-43 nm) of Cu$_x$Co$_{1-x}$Fe$_2$O$_4$\ (x = 0.0, 0.5 and 1.0) were synthesized by auto combustion method. The crystallite sizes of these materials were calculated from X-ray diffraction peaks. The band observed in…
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu…
Recent work [1] demonstrated high coercivity and magnetic moment in cobalt carbide nanoparticle assemblies and explained the high coercivity from first principles in terms of the high magnetocrystalline anisotropy of the cobalt carbide…
This research paper investigates new and first insights into the magnetic and magnetocaloric properties of one-dimensional (1D) cobalt ferrite CoFe2O4 (CFO) nanofibers elaborated by sol gel based electrospinning technique, particularly…
Due to the limited rare-earth elements resources, ferrite magnets need to be improved drastically. Ideally, for a true hard magnet, the coercive field should be larger than the saturation magnetization, which is not yet realized for…