Related papers: Deformation mechanisms in a TiNi shape memory allo…
Nanoporous metals or nanofoams are a promising material class that is considered for sensing, actuation, and catalysis. To date, they mostly based on simple noble metals such as nanoporous gold, which exhibit peculiar stress-strain response…
A microstructure-based model that accounts for the effect of grain size has been developed to study the effect of grain size on the fatigue life of Inconel 718 alloys. The fatigue behavior of two alloys with different grain size was…
The influence of the physical mechanisms activated during deformation and annealing on the microstructure and texture evolution as well as on the mechanical properties in the equiatomic CoCrFeMnNi high-entropy alloy (HEA) were investigated.…
Single-phase, multi-elements (three or more) with high concentrations show exceptional tensile strength up to ~ 0.8-1.2 GPa. However, they possess a very low 0.2% yield strength (YS), i.e., they can be permanently deformed at very…
The mechanical properties of a solid, which relate its deformation to external applied forces, are key factors in enabling or disabling the use of an otherwise optimal material in any application, strongly influencing also its service…
The rapid degradation of the functional properties of many Ti-based alloys is due to the precipitation of the $\omega$ phase. In the conventional high-temperature shape memory alloy Ti-Ta the formation of this phase compromises completely…
Using large-scale atomistic simulations, dislocation mechanics in the presence of linear complexions are investigated in an Fe-Ni alloy, where the complexions appear as nanoparticle arrays along edge dislocation lines. When mechanical shear…
The structural relaxation, potential energy states, and mechanical properties of a model glass subjected to thermal cycling are investigated using molecular dynamics simulations. We study a non-additive binary mixture which is annealed with…
We propose a theoretical framework to predict the deformation mechanism of the {\gamma}-TiAl single crystal without lattice defects by combining the generalized stacking fault energy and the Schmid factor. Our theory is validated against an…
In this paper we present a thermodynamically consistent material model which is capable of modelling ductile-to brittle failure mode transition in ductile material undergoing deformations at high strain rates, and demonstrate the…
Three-dimensional (3D) X-ray diffraction methods were used to analyze the evolution of the load-induced rearrangements of monoclinic twin microstructures within bulk nickel-titanium specimens in 3D and across six orders of magnitude in…
The question of how a disordered material's microstructure translates into macroscopic mechanical response is central to understanding and designing materials like pastes, foams and metallic glasses. Here, we examine a 2D soft jammed…
Detecting mechanical fatigue of metallic components is always a challenge in industries. In this work, we proposed to monitor the low-cycle fatigue of a 6061 aluminum alloy based on internal friction (IF) measurement, which is realized by a…
The earlier-developed master equation approach and kinetic cluster methods are applied to study kinetics of L1_0 type orderings in alloys, including the formation of twinned structures characteristic of cubic-tetragonal-type phase…
Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal…
Controlled mechanical loading was applied to Ti-15Mo alloy during annealing at 550 $^\circ$C. Massive formation of the $\omega_{\textrm{iso}}$ phase from the parent $\beta$-phase occurred during annealing at 550 $^\circ$C without external…
Deformation twinning, which occurs in fcc metals only under particular conditions of intrinsic material properties, microstructure, and loading conditions, occupies an indispensable place in their deformation mechanism maps. Nonetheless,…
Disordered fibrous matrices, formed by the random assembly of fibers, provide the structural framework for many biological systems and biomaterials. Applied deformation modifies the alignment and stress states of constituent fibers, tuning…
A model is proposed that considers aging and rejuvenation in a soft glassy material as respectively a decrease and an increase in free energy. The aging term is weighted by inverse of characteristic relaxation time suggesting greater…
Plastic deformation of micron-scale crystalline solids exhibits stress-strain curves with significant sample-to-sample variations. It is a pertinent question if this variability is purely random or to some extent predictable. Here we show,…