Related papers: Deformation mechanisms in a TiNi shape memory allo…
The deformation and crack initiation mechanisms were analyzed in a textured AZ31B-O Mg alloy subjected to fully-reversed, strain-controlled cyclic deformation along the rolling direction after 50 cycles (approximately 33% of the fatigue…
Creep deformation behaviour in single phase $\gamma$-TiAl alloy has been an extensively studied topic since the late 1970s. A lot of literatures have reported creep behaviour of $\gamma$-TiAl alloys, manufactured using different processing…
Deformation heterogeneities within microstructures of polycrystalline shape memory alloys (SMAs) during superelastic stressing are studied using both experiments and simulations. In situ X-ray diffraction, specifically the far-field high…
Friction and wear of metals are critically influenced by the microstructures of the bodies constituting the tribological contact. Understanding the microstructural evolution taking place over the lifetime of a tribological system therefore…
In the field of rehabilitation and neuroscience shape memory alloys play a crucial role as lightweight actuators. Devices are exploiting the shape memory effect by transforming heat into mechanical work. In rehabilitation applications,…
TiNiPd based shape memory alloys (SMAs) share similar microstructural features as TiNiCu-based SMAs known for their exceptional resistance to functional fatigue due to their high crystallographic compatibility, nanometer sized grains and…
Using coarse-grained molecular dynamics simulations and a united-monomer model of PE, single well-aligned multi-lamella PE crystals grown in previous work [ACS Macro Letters 12, 808 (2023)] are deformed uniaxially to mimic tensile testing.…
Intermittent plastic deformation in crystals with power-law behaviors has been reported in previous experimental studies. The power-law behavior is reminiscent of self-organized criticality, and mesoscopic models have been proposed that…
Tensile stress-strain behavior of Ni57.5Mn22.5Ga20.0 single crystal exhibiting a high-temperature 2M-martensitic phase stable up to 360\degree C has been studied in the course of thermal and mechanical cycling. The ultra-large reversible…
The damage mechanisms and load redistribution of high strength TC17 titanium alloy/unidirectional SiC fibre composite (fibre diameter = 100 $\mu$m) under high temperature (350 {\deg}C) fatigue cycling have been investigated in situ using…
The main purpose of this study is to determine, via a three dimensions Finite Element analysis (FE), the stress and strain fields at the inner surface of a tubular specimen submitted to thermo-mechanical fatigue. To investigate the surface…
The effect of oscillatory shear deformation on the fatigue life, yielding transition, and flow localization in metallic glasses is investigated using molecular dynamics simulations. We study a well-annealed Cu-Zr amorphous alloy subjected…
The mechanisms of deformation and failure of Cu/Nb nanolaminates manufactured by accumulated roll bonding were analysed using in-situ TEM mechanical tests. Dog-bone small-scale tensile specimens were prepared using a FIB-based technique…
Soft porous materials, such as biological tissues and soils, are exposed to periodic deformations in a variety of natural and industrial contexts. The detailed flow and mechanics of these deformations have not yet been systematically…
Molecular dynamics simulations were used to quantify mechanically-induced structural evolution in nanocrystalline Al with an average grain size of 5 nm. A polycrystalline sample was cyclically strained at different temperatures, while a…
The temperature and magnetic field dependencies of Ni-Mn-Ga polycrystals deformation are investigated. Ingots were prepared by arc-melting in argon atmosphere and further annealing. A training procedure (cycling across the martensitic…
High-entropy alloys (HEAs) stand out between multi-component alloys due to their attractive microstructures and mechanical properties. In this investigation, molecular dynamics (MD) simulation and machine learning were used to ascertain the…
The hysteresis or internal friction in the deformation of crystalline solids stressed cyclically is studied from the viewpoint of collective dislocation dynamics. Stress-controlled simulations of a dislocation dynamics model at various…
Fatigue failure occurs when a solid is subjected to repeated, cyclic loading. Glasses subjected to cyclic to shear deformation have recently been investigated using computer simulations and theoretical models, to characterize and…
A Twinning Induced Plasticity (TWIP) steel with a nominal composition of Fe-16.4Mn-0.9C-0.5Si-0.05Nb-0.05V was deformed to an engineering strain of 6\%. The strain around the deformation twins were mapped using the 4D-STEM technique. Strain…