Related papers: Molybdenum sputtering film characterization for hi…
Copper oxide thin films are deposited on quartz substrates by DC magnetron sputtering and the effect of deposition temperature on their optoelectronic properties is examined in detail. Scanning Electron Microscopy (SEM), X-ray diffraction…
The morphological, transport and terahertz optical properties of DC magnetron sputtered granular molybdenum thin-films with nano-grains embedded in an amorphous matrix have been studied in the normal and superconducting states. The…
The reliability of perovskite material LSCF to be used as cathode parts in solid oxide fuel cells also relies on its mechanical properties. Adequate surface conditions are desired when the as-sintered porous thin films are subjected to…
We report on the superconducting properties of molybdenum nitride thin films grown by reactive DC sputtering at room temperature with a N2:Ar mixture. Thin films grown using 5 % N2 concentration display Tc = 8 K, which is gradually reduced…
We investigate the growth conditions for thin (less than 200 nm) sputtered aluminum (Al) films. These coatings are needed for various applications, e.g. for advanced manufacturing processes in the aerospace industry or for nanostructures…
The investigations of the reactive magnetron depositing of the stoichiometric coatings metal-metalloid were done. The dependences between sputtering parameters of a target and processes of plasmochemical formation on the surface of sample…
We have observed an aggregation of carbon or carbon derivatives on platinum and natively oxidized silicon surfaces during STM measurements in ultra-high vacuum on solvent-cleaned samples previously structured by e-beam lithography. We have…
Spin coating is an out-of-equilibrium technique for producing polymer films and colloidal crystals quickly and reproducibly. In this review, we present an overview of theoretical and experimental studies of the spin coating of colloidal…
Lowering the operating temperature of Solid Oxide Fuel Cells (SOFCs) is essential for improving durability and enabling large scale commercialization. Mixed ionic-electronic conductors (MIECs) of the Ruddlesden-Popper family, such as…
A modeling approach, based on an analytical solution of the semiclassical multi-subband Boltzmann transport equation, is presented to study resistivity scaling in metallic thin films and nanowires due to grain boundary and surface roughness…
Since the stacking order sensitively affects various physical properties of layered materials, accurate determination of the stacking order is important for studying the basic properties of these materials as well as for device…
Condensation of water on metallic surfaces is critical for multiple energy conversion processes. Enhancement in condensation heat transfer efficiency often requires surface texturing and hydrophobicity, usually achieved through coatings, to…
NbN films were deposited on SS substrates by reactive DC magnetron sputtering at various N2 flow rates and substrate biasing. Effect of N2 flow rate and substrate biasing has been studied on deposition rate, surface hardness,…
Topological insulators are a class of materials with insulating bulk but protected conducting surfaces due to the combination of spin-orbit interactions and time-reversal symmetry. The surface states are topologically non-trivial and robust…
Wrinkling patterns at the metallized surface of thin polymer films are shown to be sensitive to the sticky or slippery character of the polymer/substrate interface (titanium coating, polystyrene film and coated silicon substrate). Selective…
The room temperature growth, characterization, and electrical transport properties of magnetron sputtered superconducting Ti40V60 alloy thin films are presented. The films exhibit low surface roughness and tunable transport properties. As…
In this work, we characterized gadolinium oxide films deposited on silicon by high pressure sputtering with a two-step process: first, we sputtered metallic gadolinium in an argon atmosphere and then, we performed an in-situ plasma…
We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while keeping a nearly…
Multi-layer Ti3C2Tx coatings have demonstrated an outstanding wear performance with excellent durability due to beneficial tribo-layers formed. However, the involved formation processes dependent on the tribological conditions and coating…
X-ray photoelectron spectroscopy combined with Ar+ ion etching is a powerful concept to identify different chemical states of compounds in depth profiles, important for obtaining information underneath surfaces or at layer interfaces. The…