Related papers: Physical properties and band structure of reactive…
We have synthesized highly oxygen deficient HfO$_{2-x}$ thin films by controlled oxygen engineering using reactive molecular beam epitaxy. Above a threshold value of oxygen vacancies, p-type conductivity sets in with up to 6 times 10^{21}…
Chromium selenide thin films were grown epitaxially on Al${_2}$O${_3}$(0001) and Si(111)-(7${\times}$7) substrates using molecular beam epitaxy (MBE). Sharp streaks in reflection high-energy electron diffraction and triangular structures in…
Magnetite thin fims have been grown epitaxially on ZnO and MgO substrates using molecular beam epitaxy. The film quality was found to be strongly dependent on the oxygen partial pressure during growth. Structural, electronic, and magnetic…
We report on the controlled growth of h-BN/graphite by means of molecular beam epitaxy (MBE). X-ray photoelectron spectroscopy (XPS) suggests an interface without any reaction or intermixing, while the angle resolved photoemission…
We report on the growth of epitaxial ZnO thin films and ZnO based heterostructures on sapphire substrates by laser molecular beam epitaxy (MBE). We first discuss some recent developments in laser-MBE such as flexible ultra-violet laser beam…
We have synthesized Fe$_{1+y}$Te thin films by means of molecular beam epitaxy (MBE) under Te-limited growth conditions. We found that epitaxial layer-by-layer growth is possible for a wide range of excess Fe values, wider than expected…
We investigated the unoccupied part of the electronic structure of the oxygen-deficient hafnium oxide (HfO$_{\sim1.8}$) using soft x-ray absorption spectroscopy at O $K$ and Hf $N_3$ edges. Band-tail states beneath the unoccupied Hf 5$d$…
Monolayer (ML) transition-metal dichalcogenides exist in different phases, such as the hexagonal (2H) and distorted octahedral or monoclinic (1T') phases. The different structures show vastly different properties. For example, the 2H MoTe2…
Morphological, optical and transport properties of GaN and InN nanowires grown by molecular beam epitaxy (MBE) have been studied. The differences between the two materials in respect to growth parameters and optimization procedure was…
Using molecular beam epitaxy (MBE) to grow multi-elemental oxides (MEO) is generally challenging, partly due to difficulty in stoichiometry control. Occasionally, if one of the elements is volatile at the growth temperature, stoichiometry…
Atomically thin transition metal dichalcogenide films with distorted trigonal (1T$^\prime$) phase have been predicted to be candidates for realizing quantum spin Hall effect. Growth of 1T$^\prime$ film and experimental investigation of its…
The Pd, and Pt based ABO2 delafossites are a unique class of layered, triangular oxides with 2D electronic structure and a large conductivity that rivals the noble metals. Here, we report successful growth of the metallic delafossite PdCoO2…
Defects such as oxygen vacancy are widely considered to be critical for the performance of HfO2-based devices, and yet atomistic mechanisms underlying various exotic effects such as wake-up and fluid imprint remain elusive. Here, guided by…
The optoelectronic properties induced by oxygen vacancy defects in MgO(111) monolayers have been studied using hybrid level of DFT method. HSE calculations shows significant reduction in electronic band gap of MgO monolayer as a result of…
We studied structural, optical and magnetic properties of high-quality 5 and 15% Co-doped ZnO films grown by plasma-assisted molecular beam epitaxy (MBE) on (0001)-sapphire substrates. Magnetic force microscopy (MFM) and magnetic…
We report the structural and optical properties of molecular beam epitaxy (MBE) grown 2-dimensional (2D) material molybdenum diselenide (MoSe2) on graphite, CaF2 and epitaxial graphene. Extensive characterizations reveal that 2H- MoSe2…
In light of the rise of transition metal dichalcogenides as 2D semiconductors for device applications, band engineering becomes very important from an application point of view. In many of these materials, such as the canonical example of…
We fabricated NiFe$_\textrm{2}$O$_\textrm{x}$ thin films on MgAl$_2$O$_4$(001) substrates by reactive dc magnetron co-sputtering varying the oxygen partial pressure during deposition. The fabrication of a variable material with oxygen…
Hybrid oxide molecular beam epitaxy (hMBE), a thin-film deposition technique in which transition metal cations are delivered using a metal-organic precursor, has emerged as the state-of-the-art approach to the synthesis of electronic-grade…
As-grown superconducting MgB_2 thin films have been grown on SrTiO_3(001), MgO(001), and Al_2O_3(0001) substrates by a molecular beam epitaxy (MBE) method with novel co-evaporation conditions of low deposition rate in ultra-high vacuum. The…